Haobin Dong

Haobin Dong

Auto-generated profile, based on publicly available information

Haobin Dong

School of Automation, China University of Geosciences, Wuhan, China

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 August 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Huan LiuHuan Liu
Huan Liu
XWXiaobin Wang
Xiaobin Wang
CZChangfeng Zhao
Changfeng Zhao
XHXiangyun Hu
Xiangyun Hu
HDHaobin Dong
Haobin Dong
Zheng LiuZheng Liu
Zheng Liu
Magnetic target positioning methods that use magnetic gradient tensors have wide application prospects in unexploded ordnance detection, moving magnetic target tracking, and so on. However, the commonly used positioning methods, such as Nara, Frahm, and scalar triangulation and ranging (STAR), still have some problems. Namely, these methods cannot avoid the influence of the geomagnetic field, depend highly on sensor accuracy, and have poor tolerances to environmental noise, all of which severely restrict their practical applications. To overcome the aforementioned bottleneck, this article proposes a new two-point tensor positioning (TPTP) method based on a magnetic moment constraint. First, a two-point magnetic gradient tensor-measurement structure is built, and a target positioning function is constructed in which a penalty term with target magnetic moment information is introduced. Second, through simulation and comparative analysis, the approximate value range of the optimal penalty coefficient is delimited, and the objective function with penalty items greatly improves the optimization success rate. Finally, we compare the TPTP with state-of-the-art methods in various scenarios, including cases with and without geomagnetic fields, with different sensor accuracies, and with different levels of environmental noise. The experimental results indicate that the proposed TPTP method can effectively avoid the influence of the geomagnetic field. This method can also be used to realize the positioning and tracking of a magnetic target, even if the sensor accuracy is relatively low or the environmental noise is relatively large.

5 March 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Huan LiuHuan Liu
Huan Liu
RHRuikuan Hu
Ruikuan Hu
HDHaobin Dong
Haobin Dong
Zheng LiuZheng Liu
Zheng Liu
Steel strips, renowned for their exceptional strength, durability, and impact resistance, are ubiquitous in various manufacturing sectors, notably aerospace, shipbuilding, and automotive industries. However, surface defects on these strips are inevitable due to various factors, including processing and environmental conditions. As a result, the efficient detection of these defects is paramount. This study introduces SFC-YOLOv8, a novel method for detecting surface defects on steel strips that leverages an improved YOLOv8 framework in the spatial-frequency domain. Initially, by exploiting the distinct high-frequency features of defect images, we extract mixed spatial-frequency domain features before applying YOLOv8, enhancing its sensitivity to low-contrast defects. Furthermore, we incorporate a global-local information-enhanced attention module into YOLOv8’s neck, which integrates high-frequency, low-frequency, and local perceptual information to capture defect features more effectively, boosting the model’s capability to detect minute and subtle defects. Additionally, we propose a frequency domain feature adaptive module that adaptively adjusts the soft threshold based on image frequency domain information, filtering out background noise while preserving the underlying semantic information of the image, thereby enhancing defect detection precision under varying lighting conditions. Comparative evaluations with conventional detection methods reveal that SFC-YOLOv8 achieves a mean average precision of 85.6%, a detection speed of 203 frames per second, and a compact model parameter of 4.36 MB, showcasing its superior overall performance. Ablation studies further confirm that SFC-YOLOv8 outperforms traditional YOLOv8 by enhancing detection precision by 6.6%.

29 May 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Huan LiuHuan Liu
Huan Liu
XZXinglin Zhang
Xinglin Zhang
HDHaobin Dong
Haobin Dong
Zheng LiuZheng Liu
Zheng Liu
XHXiangyun Hu
Xiangyun Hu
The magnetic anomaly signal tends to be contaminated by ambient environmental noise due to the complexity and diversity in the field of magnetic anomaly detection (MAD). The current denoising methods are effective in improving the signal-to-noise ratio (SNR). However, most of them are only applicable to the Gaussian noise and perform poorly for the practical geomagnetic noise, that is the nonstationary noise with a power spectral density (PSD) of 1/ fa . To solve this issue, a MAD method based on energy concentrated discrete cosine wavelet transform is proposed in this paper. A novel framework through fusing wavelet transform and discrete cosine transform, dubbed WT-DCT, is constructed, which consists of abnormal signal acquisition, frequency domain energy concentration, and discrete wavelet transformation. The SNR of the magnetic anomaly is improved by extracting the principal components of the scale signal in wavelet transformation through the discrete cosine transform. Through comparing the WT-DCT to four commonly used and accepted methods with extensive simulations and field tests, the results demonstrate that with variations of the geomagnetic noise strengths in the range from 250 nT to 1000 nT, the proposed WT-DCT achieves the highest SNR improvement by about 44.81% and the best structural similarity (SSIM) improvement by about 84.75%.

16 August 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Huan LiuHuan Liu
Huan Liu
ZWZehua Wang
Zehua Wang
CZChangfeng Zhao
Changfeng Zhao
XHXiangyun Hu
Xiangyun Hu
HDHaobin Dong
Haobin Dong
Zheng LiuZheng Liu
Zheng Liu
The free induction decay (FID) signal output by a proton precession magnetometer (PPM) is usually only of the microvolt level, and its frequency is proportional to the magnetic field strength. Therefore, obtaining a high signal-to-noise ratio (SNR) FID signal is crucial for improving the measurement accuracy of the magnetometer. The current gold standards for noise reduction in FID signals-singular value decomposition (SVD) and principal component analysis (PCA)-still have limited denoising capabilities, especially in cases with strong noise interference. In this study, a new noise-reduction algorithm for FID based on multilinear SVD (MLSVD) is proposed. First, equal delay-based multichannel data sampling is used to obtain multiple correlated signals, and thus, the obtained multiple signals are constructed as a third-order tensor; second, the MLSVD is employed to calculate and remove the noise singular value of the tensor; and third, canonical polyadic decomposition (CPD) is used to fuse the multichannel FID signal processed by MLSVD and eliminate signal noise, further improving the SNR. Subsequently, a PPM experimental test platform was constructed, and extensive simulation and practical comparison tests were conducted. The results show that, when the SNR is -10 dB, the noise-reduction effect of the MLSVD is about 9.12 dB higher than that of the SVD and about 8.15 dB higher than that of the PCA, with an overall increase of 28%. In an environment with strong noise interference-with an SNR of -30 dB-both PCA and SVD are no longer viable, while MLSVD can still effectively suppress noise, with a signal-to-noise improvement ratio (SNIR) being as high as 50.36 dB.

18 July 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Huan LiuHuan Liu
Huan Liu
CZChangfeng Zhao
Changfeng Zhao
YLYihao Liu
Yihao Liu
HDHaobin Dong
Haobin Dong
XHXiangyun Hu
Xiangyun Hu
Zheng LiuZheng Liu
Zheng Liu
The effective imaging of metal workpieces is of great significance in the field of nondestructive testing. However, most commonly used detection methods, including radiographic, magnetic flux leakage, and electromagnetic techniques, are easily affected by environmental influences and have small detection ranges. Therefore, a new active imaging approach for metal workpieces using a combination of electromagnetic induction and magnetic anomalies is proposed herein. A magnetization model of a metal workpiece is established based on the magnetic dipoles and molecular current. An active detection method is designed, where an H-bridge is used to drive the transmission coil and generate a bipolar excitation magnetic field that can magnetize the metal workpiece. A differential detection approach is adopted to further suppress the background noise. An active detection system is constructed using a $5\times $ 5 magnetic sensor array, which can achieve 3-D imaging using a cubic convolution interpolation algorithm. Intensive comparative experiments have been carried out, with the following conditions: different targets at the same height, the same target at different heights, and different targets’ tracking. The experimental results show that the proposed method can not only extend the detection range of metal workpieces but also effectively detect M15 studs, M4 studs, and other small metal workpieces under 20 cm in size.

11 June 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Huan LiuHuan Liu
Huan Liu
JBJunchi Bin
Junchi Bin
YLYihao Liu
Yihao Liu
HDHaobin Dong
Haobin Dong
Zheng LiuZheng Liu
Zheng Liu
Erik BlaschErik Blasch
Erik Blasch
Geomagnetic data forecasting plays a critical role for natural disaster institutions to respond promptly or make decisions for the magnetic storm warning, earthquake early warning, and so on. However, the forecasting accuracy is not always reliable due to the spatial correlations among different sites and the temporal correlations from each site measurement update. To address the correlation problems, a novel sparse geomagnetic data forecasting (SGCast) matrix framework is proposed in this study. To be specific, a coupled matrix factorization is proposed to model the sparse multilocation geomagnetic data and spatial correlation, which is demonstrated with an example from seven Chinese cities. After the factorization, two subspaces, location subspace, and temporal subspace are derived. Finally, the future geomagnetic signals are reconstructed based on forecasting temporal subspace and matrix reconstruction. The experimental results from the extensive comparison studies demonstrate the superiority of the proposed SGCast approach compared to the state-of-the-art approaches, with an approximate improvement of the forecasting accuracy as 10%~15%.