Magnetic anomaly detection (MAD) is one of the most effective methods for engineering and environmental geophysical exploration, and plays an important role in scientific research and human technological innovation. Although numerous systematic and valuable articles have been published on the topic of MAD, they only briefly summarized relevant research from an algorithm perspective. Moreover, the practical applications in different scenarios are neglected and a comprehensive review on MAD is still lacking. In this case, it is particularly necessary to implement a comprehensive survey on the relevant publications of MAD, which could help readers to understand the current state-of-the-art techniques conveniently and quickly develop an effective solution to MAD problems in practice. Specifically, the developments of the MAD, mainly consisting of detection models and detection methods, are combed in this paper. In addition, the different application scenarios of the MAD have been argued. More importantly, the existing issues and future trends are further discussed. We believe that the work done in this survey could supply convenience and inspiration for the researchers who want to devote their efforts to MAD.
29 May 2023 in IEEE Transactions on Instrumentation and Measurement
The magnetic anomaly signal tends to be contaminated by ambient environmental noise due to the complexity and diversity in the field of magnetic anomaly detection (MAD). The current denoising methods are effective in improving the signal-to-noise ratio (SNR). However, most of them are only applicable to the Gaussian noise and perform poorly for the practical geomagnetic noise, that is the nonstationary noise with a power spectral density (PSD) of 1/ fa . To solve this issue, a MAD method based on energy concentrated discrete cosine wavelet transform is proposed in this paper. A novel framework through fusing wavelet transform and discrete cosine transform, dubbed WT-DCT, is constructed, which consists of abnormal signal acquisition, frequency domain energy concentration, and discrete wavelet transformation. The SNR of the magnetic anomaly is improved by extracting the principal components of the scale signal in wavelet transformation through the discrete cosine transform. Through comparing the WT-DCT to four commonly used and accepted methods with extensive simulations and field tests, the results demonstrate that with variations of the geomagnetic noise strengths in the range from 250 nT to 1000 nT, the proposed WT-DCT achieves the highest SNR improvement by about 44.81% and the best structural similarity (SSIM) improvement by about 84.75%.
29 June 2022 in IEEE Transactions on Instrumentation and Measurement
Compensating the magnetic interference related to airplane maneuvers is essential to high-precision aeromagnetic measurement. In estimating the compensation coefficients, aeromagnetic compensation based on the Tolles–Lawson model needs to address the reduction in accuracy and robustness arising from several negative effects. Because the existing methods only suppress single effects independently, the scope of their application is very limited. To address this problem, a cooperative suppression method of the negative effects associated with multicollinearity and abnormal data is proposed in this study. For this method, abnormal data produced by the dead-zone effect of a classical optically pumped magnetic sensor are assigned lower weights, thereby reducing their negative influence in the estimation of the compensation coefficient. Moreover, a ridge parameter is added to further reduce the multicollinearity of the compensation coefficient. Theoretical evaluation shows that in the presence of 20% abnormal data and 0.5 correlation, this method reduces the mean square error (MSE) for the coefficient to 0.76 compared with 4.39 for the least-squares (LS) method, 3.43 for the ridge method, and 2.13 for the robust method. For practicality verification, we built an experimental platform and mounted it on an aeromagnetic survey airplane, and then performed a compensation flight test. The results demonstrate an improved ratio for our method of 12.79, which is significantly higher than 0.56 for the LS method, 2.73 for the ridge method, 4.29 for the robust method, and 7.95 for the state-of-the-art commercial compensator.
1 February 2021 in Review of Scientific Instruments
The traditional aeromagnetic compensation model does not consider the negative effects of the gradient of the geomagnetic background field. Especially in emergency aeromagnetic surveys, this gradient effect is obvious and can reduce the performance of magnetic compensation. To solve this problem, we propose a method of reducing the gradient effect of the magnetic sensor for aeromagnetic compensation. A magnetic gradient model of the Earth’s background field is established for the aeromagnetic compensation, and the gradient effect is then suppressed using altitude data. An experimental platform was built, and flight tests were conducted. Comparison results show that the adoption of the proposed method increased the improvement ratio (IR) of our compensator on two flights from 20.4 and 21.3 to 25.9 and 26.0, with the growth rates of the IR, respectively, reaching 27% and 22%.
Fluxgate sensors are currently widely used for weak magnetic field measurement because of their relatively great performance, such as resolution, power consumption, and measurement of vector magnetic fields directly. Since the analog fluxgate sensor has some drawbacks, e.g., it would be influenced by the noise of the analog circuit. Hence, in recent years, the analog circuit is gradually inclined to be realized by digital processing in which the software parameter adjustment is employed to replace the analog components, which can greatly improve the flexibility of the design. This paper proposes a digital single-axis fluxgate sensor according to the cobalt-based amorphous effect. To be specific, the analog signal output by the fluxgate is sampled directly by an analog-to-digital converter to obtain the signal waveform in digital form after amplification. The demodulation, filtering, and integration of the signal are all solved by mathematical algorithms. Based on the working principle of the fluxgate sensor, the selection of the magnetic core material and coil winding method of the fluxgate sensor probe is introduced in detail. The design and function of the excitation circuit and preamplifier circuit, as well as the specific realization of digital signal processing, are described. Finally, the performance test of the digital fluxgate sensor was performed under laboratory conditions, and the magnetic anomaly detection comparison experiment was performed outdoors with commercial fluxgate sensors. To sum up, the linearity of the digital single-axis fluxgate sensor is better than 1 × 10−5, and the root mean square noise value is below 0.1 nT. At the same time, it has good magnetic field tracking performance and is extremely sensitive to the magnetic field of the measurement area.
3 April 2023 in IEEE Transactions on Instrumentation and Measurement
In the field of magnetic anomaly detection (MAD), the anomaly signal is easy to be submerged by ambient electromagnetic interference. Though the existing noise suppression methods can effectively improve the signal-to-noise ratio (SNR), there are still some intractable problems, such as signal distortion and boundary blur. To solve these problems, a novel MAD method based on structured low-rank (SLR) and total variation (TV) regularization constraints is proposed in this paper. To be specific, a new framework SLR-TV, which mainly contains abnormal signal acquisition, objective function solution, and inverse transform operation is constructed. The noise suppression performance is improved by leveraging the structured low-rankness of the signal. To preserve clean boundaries of the anomalies, an anisotropic TV regularization constraint is employed in the approach. Comparing the SLR-TV with five state-of-the-art methods with extensive synthetic and field tests, the results demonstrate that the proposed SLR-TV method achieves the highest SNR improvement by about 15.62% and the best structural similarity (SSIM) improvement by about 62.95% over other methods in the range from -40 dB to 0 dB, showing the utility and high-fidelity of the proposed framework in low SNR.