Anisotype n-TiO2/ p-Si heterojunctions are fabricated by the deposition of a TiO2film on a polished poly-Si substrate using magnetron sputtering. The electrical properties of the heterojunctions are...
The I–V characteristics of NiO/CdTe heterostructures fabricated by reactive magnetron sputtering are measured at different temperatures. It is established that current transport through the NiO/CdTe heterojunction is mainly controlled via generation–recombination and tunneling under forward bias and via tunneling under reverse bias. The investigated heterostructures generate an open-circuit voltage of Voc = 0.26 V and a short-circuit current density of Isc = 58.7 μA/cm2 at an illumination intensity of 80 mW/cm2.
1 September 2016 in Semiconductor Science and Technology
MoOx/n-CdTe photosensitive heterostructures were prepared by the deposition of molybdenum oxide thin films onto n-type single-crystal CdTe substrates by DC reactive magnetron sputtering. The obtained heterojunctions possessed sharply defined rectifying properties with the rectification ration RR ~ 106. The temperature dependences of the height of the potential barrier and series resistance of the MoOx/CdTe heterojunctions were investigated. The dominating current transport mechanisms through the heterojunctions were determined at forward and reverse biases. The analysis of capacitance-voltage (C–V) characteristics, measured at different frequencies of the small amplitude AC signal and corrected by the effect of the series resistance, provided evidence of the presence of electrically charged interface states, which significantly affect the measured capacitance.