26 September 2023 in Carbon
24 November 2025 in Advanced Physics Research
AMAiymkul A. Markhabayeva
+2
In the past decades, carbon nanowalls (CNWs) have attracted great interest due to their specific electronic structure and morphology suitable for optoelectronic, photo‐ and electrochemical systems. This report presents a comparative study on the growth of CNWs on various substrates–quartz (SiO 2 ), stainless steel (SS304), tantalum (Ta), and titanium (Ti) using the capacitively coupled plasma‐enhanced chemical vapor deposition (CCP‐PECVD). It is found that the substrate properties significantly influence the morphology, degree of graphitization, and electrochemical characteristics of the CNWs. SiO 2 provides the lowest defect density and highest structural order, while Ta and Ti promote accelerated CNWs growth due to their high thermal conductivity. Electrochemical tests reveal pronounced photoelectrochemical activity of the CNWs, especially on metallic substrates. Impedance spectroscopy indicates an increase in the electrochemical activity after CNWs growth. The results highlight the importance of substrate selection for controlling the structural and functional properties of the CNWs.
16 November 2022 in Fullerenes, Nanotubes and Carbon Nanostructures
This work presents experimental results on the synthesis of сarbon nanowalls (CNWs) with predefined morphology on the surface of the nanoporous alumina membrane using two different methods, namely radio-frequency plasma-enhanced chemical vapor deposition (RF-PECVD) and radical-injection (RI)-PECVD. Obtained samples were characterized by the methods of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. From the microstructure analyses of CNWs, it has been observed that there is a time dependence on the reproducibility of membrane morphology by CNWs. At the early stage of nanowalls growth, nanowalls prefer to grow around the edges of nanopores and continue to grow vertically with time. In RF-PECVD, the nanopores’ size begins to shrink drastically and pores are completely covered by secondary flake-like nanowalls after 25 minutes of growth. In the case of CNWs grown using RI-PECVD, nanowalls are more vertical and self-supported. This is because of the rapid and sustained production of hydrogen radicals that prevent the secondary growth of carbon nanowalls. In addition, the influence of pores diameter and membrane thickness on the growth of RI-PECVD CNWs was revealed.
5 March 2026 in International Journal of Hydrogen Energy
1 January 2020 in Materials Today: Proceedings
20 June 2025 in Physical Sciences and Technology
This study focuses on the synthesis of carbon nanowalls (CNWs) and nitrogen-doped CNWs using the RI-PECVD method and their investigation through in situ Raman spectroscopy during voltammetric cycling and potentiostatic charging under both reduction and oxidation potentials. CNWs were synthesized on Ti/SiO₂/Si substrates. Electrochemical experiments were conducted in a three-electrode cell with CNWs as the working electrode, and analytes such as urea, citric acid, and hydrogen peroxide (H 2 O 2 ) were used to study their effects during in situ Raman measurements. The Raman spectra of CNWs and N-doped CNWs were recorded in a voltage range of -1 V to 1 V (vs. Ag/AgCl), revealing no significant shifts in peak positions but showing an increase in the G to 2D peak ratio at higher voltages, indicating strong electron doping. The cyclic voltammetry results demonstrated that nitrogen doping enhances the reductive current of CNWs, with a clear reduction peak observed at -0.7 V across all analytes. The ID/IG peak ratio of N-doped CNWs increased upon analyte addition, suggesting the introduction of defects and restoration of sp2 domains. Furthermore, the position of the G and 2D peaks shifted significantly in response to different analytes. Sharper fluctuations were observed in N-doped CNWs. These results not only provide valuable insights into the electrochemical properties of CNWs but also highlight their potential for electrochemical sensing applications, offering a promising avenue for future research and development in this field. Key words: carbon nanowalls, in situ raman, nitrogen doping, electrochemical reduction.