1 April 2016 in Journal of Bridge Engineering
Structural deformation caused by live loads is a major concern in the design of multispan suspension bridges. Deformation characteristics of double-cable multispan suspension bridges are the focus of this paper. The authors propose a simplified mechanical model of the double-cable multispan suspension bridge for static analysis. Analytical formulas for calculating maximum deflection of the girder in a loaded span were deduced on the basis of the mechanical model. Finite-element models were established to verify formulas, and a comparison of formulas with FEM analysis revealed excellent agreement. The effects of major design parameters on the deformation of double-cable multispan suspension bridges were also studied. Research shows that the distribution of dead loads to the top and bottom cables had little effect on deformation. The sag-to-span ratio of the main cable imposed a significant effect on deformation, and structural deformation decreased with a decrement in top-cable sag or an increment...
1 March 2017 in Journal of Bridge Engineering
Sliding resistance of the main cable is of the biggest concern when designing multispan suspension bridges. This paper presents a study on the layout form and sliding-resistance stability of the main cable in a double-cable multispan suspension bridge. It proposes a “top cable to bottom cable” layout, based on which analytical formulas for calculating the sliding-resistance coefficient of the double-cable have been derived. The formulas were verified by finite-element models (FEMs), and the results showed good agreement. The effects of major design parameters on the sliding resistance of the main cable were studied. Analysis shows that the top cable to bottom cable layout can effectively improve the sliding resistance of the main cable, and the bottom cable of the loaded span and the top cable of the unloaded span control the antisliding design of double cable; the sliding resistance of the main cable decreases along with an increase in the ratio of tower stiffness to cable stiffness; the influenc...
1 January 2021 in Shock and Vibration
Cable‐supported arch bridges have had many cable break accidents, which led to dramatic deck damage and even progressive collapse. To investigate the dynamic response and robustness of cable‐supported arch bridges subjected to cable breaking, numerical simulation methods were developed, compared, and analyzed, and an effective and accurate simulation method was presented. Then, the cable fracture of a prototype bridge was simulated, and the dynamic response of the cable system, deck, and arch rib was illustrated. Finally, the robustness evaluation indexes of the cable system, deck, and arch rib were constructed, and their robustness was evaluated. The results show that the dynamic response of the adjacent cables is proportional to the length of the broken cable, while the dynamic response of the deck is inversely proportional to the length of the broken cable. The dynamic amplification factor of the cable tension and deck displacement is within 2.0, while that of the arch rib bending moment exceeds 2.0. The break of a single cable will not trigger progressive collapse. When subjected to cable breaking, the deck system has the least robustness. The proposed cable break simulation procedure and the robustness evaluation method are applicable to both existing and new cable‐supported bridges.
25 April 2020 in Mathematical Problems in Engineering
The automated modal identification has been playing an important role in online structural damage detection and condition assessment. This paper proposes an improved hierarchical clustering method to identify the precise modal parameters by automatically interpreting the stabilization diagram. Two major improvements are provided in the whole clustering process. The modal uncertainty is first introduced in the first stage to eliminate as many as possible mathematical modal data to produce more precise clustering threshold, which helps to produce more precise clustering results. The boxplot is introduced in the last stage to assess the precision of the clustering results from a statistical perspective. Based on an iterative analysis of boxplot, the outliers of the clustering results are found out and eliminated and the precise modal results are finally produced. The Z24 benchmark experiment data are utilized to validate the feasibility of the proposed method, and comparison between the previous method and the improved method is also provided. From the result, it can be concluded that the modal uncertainty is more effective than the other modal criteria in distinguishing the mathematical modal data. The modal results by clustering process are not precise in statistic and the boxplot can find out the outliers of the clustering results and produce more precise modal results. The improved automated modal identification method can automatically extract the physical modal data and produce more precise modal parameters.