11 December 2025 in IEEE Transactions on Instrumentation and Measurement
The characterization of microwave fields holds significant engineering importance in high-frequency chip design and performance optimization. In this study, we propose a non-invasive wide-field imaging method based on the spectral hole-burning effect in optically detected magnetic resonance (ODMR). This wide-field imaging method enables imaging of microwave fields at different frequencies under near-field radiator operating conditions. Its feasibility is confirmed by characterizing near-field radiator-generated microwave fields across multiple frequency and power settings. Furthermore, the effectiveness of the method is validated through a comparative analysis of simulation results and experimental measurements. Under the current experimental conditions, the results show that the approach achieves a frequency resolution of 100 kHz over the range of the resonance region, a microwave detection sensitivity of 0.78 nT/Hz1/2, a spatial imaging resolution of 1.55 μm, and the minimum detectable power is 1 mW. The above methods indicate great potential for application in the fields of integrated circuit fault diagnosis, electromagnetic compatibility testing, and radio equipment parameter calibration.