17 April 2024 in IEEE/ASME Transactions on Mechatronics
The aircraft braking system is an essential subsystem of the aircraft, with high safety requirements. The conventional aircraft braking system has complex and long pipelines that are prone to leakage and vibration. To improve the reliability and safety of the aircraft, a dual-redundancy more-electric braking system (DMEBS) based on on / off valves was proposed. The DMEBS has dual-redundant nonsimilar hydraulic power sources to improve the reliability of the system. The on / off valves were utilized as brake control valves to improve the robustness of the system. In addition, an energy management strategy and a high-precision brake pressure regulation algorithm were designed for the DMEBS. The rule-based logical threshold energy management strategy relies on real-time velocity and multiple thresholds for allocating hydraulic power sources, aiming to reduce the electrical power of the DMEBS. The nonlinear flow rate control method (NFRCM) can realize high-precision brake pressure and low power. A prototype was developed, and then, it was tested on an experimental bench and a ground inertial test bench to verify the performance of the DMEBS and regulation strategy. The experimental results show that the pressure error of the NFRCM is within 0.2 MPa, while the standard deviation and other indicators show superior performance compared to conventional controllers.
1 September 2021 in Journal of Physics: Conference Series
In recent years, a novel electro-hydraulic integrated self-powered brake system for aircraft has been proposed. A modular “self-powered device” is installed near the wheel to recover the rotational kinetic energy when the wheel lands and convert it into hydraulic energy for braking. The energy conversion device is the compact high-power-weight ratio energy harvesting mechanism, which needs to be designed in the extremely narrow internal space of the wheel. At the same time to ensure high reliability, high strength, high power weight ratio, difficult, and wheel brake disc internal temperature reaches 600 °C above, this to the design of the can take institutions are challenges. In this paper, the high strength compact high power-weight ratio energy conversion device as the research goal, through new principles, new structure, new materials, new technology, new methods and other means of the energy taking mechanism design and development, and finally achieve the strength, stiffness, reliability, life of the energy conversion device to meet the requirements of the system.