Recently, the mixed‐dimensional (3D/2D or 3D/1D) perovskite solar cells using small organic spacers have attracted interest due to their outstanding long‐term stability. Here, a new type of thiophene‐based organic cation 2‐(thiophene‐2yl‐)pyridine‐1‐ium iodide (ThPyI), which is used to fabricate mixed‐dimensional 3D/1D perovskite solar cells, is presented. The ThPyI‐based 1D perovskitoid is applied as a passivator on top of a 3D methyl ammonium lead iodide (MAPI) to fabricate surface‐passivated 3D/1D perovskite films or added alone into the 3D perovskite precursor to generate bulk‐passivated 3D MAPI. The 1D perovskitoid acts as a passivating agent at the grain boundaries of surface‐passivated 3D/1D, which improves the power conversion efficiency (PCE) of the solar cells. Grazing incidence wide‐angle X‐ray scattering (GIWAXS) studies confirm that ThPyI triggers the preferential orientation of the bulk MAPI slabs, which is essential to enhance charge transport. Champion bulk‐passivated 3D and surface‐passivated 3D/1D devices yield 14.10% and 19.60% PCE, respectively. The bulk‐passivated 3D offers favorable stability, with 84% PCE retained after 2000 h without encapsulation. This study brings a new perspective to the design of organic spacers having a different binding motif and a passivation strategy to mitigate the impact of defects in hybrid 3D/1D perovskite solar cells.
Widespread application of organic‐inorganic halide perovskites (OIHP) still faces a major obstacle in mitigating moisture‐induced degradation. Integrating organic spacers, as defect passivation facilitators along with low‐dimensional phase (LDP) formation is an effective approach to enhance the efficiency and robustness of 3D methyl ammonium lead iodide (MAPI) in photovoltaics (PV). Here, the formamidinium cation (FA+) employing 3,5‐difluorobenzene‐1‐carboximidamidium iodide (2F), 4‐(trifluoromethyl)benzene‐1‐carboximidamidium iodide (3F), and 2,3,4,5,6‐pentafluorobenzene‐1‐carboximidamidium iodide (5F) organic spacers as passivation layer in 3D/LDP OIHP solar cells is utilized. Fluorine atom position and quantity in organic spacers change the optoelectronic characteristics of the perovskites, enhancing hydrophobicity, facilitating LDP formation, and augmenting dipole moments, thereby facilitating charge separation processes. PV performance analysis reveals that 3F‐treated 3D/LDP devices achieve the highest efficiency of 19.22%. Experimental results and density functional theory (DFT) studies attribute the higher performance of 3F‐modified devices to effective LDP formation, enhanced passivation of defect states at perovskite surfaces and grain boundaries, the highest dipole moment and lowest band gap among the evaluated spacers. The stability tests show that, after 1000 h, 3F‐ and 5F‐modified 3D/LDP OIHP devices retain over 85% of their initial efficiency. This research opens novel avenues for designing appropriate organic spacers to attenuate defects in 3D/LDP PV devices.