Since their introduction in 2017, the efficiency of lead‐free halide perovskite solar cells based on Cs2AgBiBr6 has not exceeded 3%. The limiting bottlenecks are attributed to a low electron diffusion length, self‐trapping events and poor selectivity of the contacts, leading to large non‐radiative VOC losses. Here, 2D/3D hybrid double perovskites are introduced for the first time, using phenethyl ammonium as the constituting cation. The resulting solar cells show an increased efficiency of up to 2.5% for the champion cells and 2.03% on average, marking an improvement by 10% compared to the 3D reference on mesoporous TiO2. The effect is mainly due to a VOC improvement by up to 70 mV on average, yielding a maximum VOC of 1.18 V using different concentrations of phenethylammonium bromide. While these are among the highest reported VOC values for Cs2AgBiBr6 solar cells, the effect is attributed to a change in recombination behavior within the full device and a better selectivity at the interface toward the hole transporting material (HTM). This explanation is supported by voltage‐dependent external quantum efficiency, as well as photoelectron spectroscopy, revealing a better energy level alignment and thus a better hole‐extraction and improved electron blocking at the HTM interface.
Two‐dimensional (2D) hybrid double perovskites are a promising emerging class of materials featuring superior intrinsic and extrinsic stability over their 3D parent structures, while enabling additional structural diversity and tunability. Here, we expand the Ag–Bi‐based double perovskite system, comparing structures obtained with the halides chloride, bromide, and iodide and the organic spacer cation 4‐fluorophenethylammonium (4FPEA) to form the n = 1 Ruddlesden–Popper (RP) phases (4FPEA)4AgBiX8 (X = Cl, Br, I). We demonstrate access to the iodide RP‐phase through a simple organic spacer, analyze the different properties as a result of halide substitution and incorporate the materials into photodetectors. Highly oriented thin films with very large domain sizes are fabricated and investigated with grazing incidence wide angle X‐ray scattering, revealing a strong dependence of morphology on substrate choice and synthesis parameters. First‐principles calculations confirm a direct band gap and show type Ib and IIb band alignment between organic and inorganic quantum wells. Optical characterization, temperature‐dependent photoluminescence, and optical‐pump terahertz‐probe spectroscopy give insights into the absorption and emissive behavior of the materials as well as their charge‐carrier dynamics. Overall, we further elucidate the possible reasons for the electronic and emissive properties of these intriguing materials, dominated by phonon‐coupled and defect‐mediated polaronic states.
2 January 2025 in Journal of the American Chemical Society
Recently, the mixed‐dimensional (3D/2D or 3D/1D) perovskite solar cells using small organic spacers have attracted interest due to their outstanding long‐term stability. Here, a new type of thiophene‐based organic cation 2‐(thiophene‐2yl‐)pyridine‐1‐ium iodide (ThPyI), which is used to fabricate mixed‐dimensional 3D/1D perovskite solar cells, is presented. The ThPyI‐based 1D perovskitoid is applied as a passivator on top of a 3D methyl ammonium lead iodide (MAPI) to fabricate surface‐passivated 3D/1D perovskite films or added alone into the 3D perovskite precursor to generate bulk‐passivated 3D MAPI. The 1D perovskitoid acts as a passivating agent at the grain boundaries of surface‐passivated 3D/1D, which improves the power conversion efficiency (PCE) of the solar cells. Grazing incidence wide‐angle X‐ray scattering (GIWAXS) studies confirm that ThPyI triggers the preferential orientation of the bulk MAPI slabs, which is essential to enhance charge transport. Champion bulk‐passivated 3D and surface‐passivated 3D/1D devices yield 14.10% and 19.60% PCE, respectively. The bulk‐passivated 3D offers favorable stability, with 84% PCE retained after 2000 h without encapsulation. This study brings a new perspective to the design of organic spacers having a different binding motif and a passivation strategy to mitigate the impact of defects in hybrid 3D/1D perovskite solar cells.
In the field of perovskite solar cells, explorations of new lead-free all-inorganic perovskite materials are of great interest to address the instability and toxicity issues of lead-based hybrid perovskites. Recently, copper-antimony-based double perovskite materials have been reported with ideal band gaps, which possess great potential as absorbers for photovoltaic applications. Here, we synthesize Cs2CuSbCl6 double perovskite nanocrystals (DPNCs) at ambient conditions by a facile and fast synthesis method, namely, a modified ligand-assisted reprecipitation method. We choose methanol as a solvent for precursor salts as it is less toxic and easily removed in contrast to widely used dimethylformamide. Our computational structure search shows that the Cs2CuSbCl6 structure containing alternating [CuCl6]5− and [SbCl6]3− octahedral units is a metastable phase that is 30 meV/atom higher in energy compared to the ground state structure with [CuCl3]2− and [SbCl6]3− polyhedra. However, this metastable Cs2CuSbCl6 double perovskite structure can be stabilized through solution-based nanocrystal synthesis. Using an anion-exchange method, Cs2CuSbBr6 DPNCs are obtained for the first time, featuring a narrow bandgap of 0.9 eV. Finally, taking advantage of the solution processability of DPNCs, smooth and dense Cs2CuSbCl6 and Cs2CuSbBr6 DPNC films are successfully fabricated.