Stoichiometric troilite (FeS) is a common phase in differentiated and undifferentiated meteorites. It is the endmember of the iron sulfide system. Troilite is important for investigating shock metamorphism in meteorites and studying spectral properties and space weathering of planetary bodies. Thus, obtaining coarse‐grained meteoritic troilite in quantities is beneficial for these fields. The previous synthesis of troilite was achieved by pyrite or pyrrhotite heating treatments or chemical syntheses. However, most of these works lacked a visual characterization of the step by step process and the final product, the production of large quantities, and they were not readily advertised to planetary scientists or the meteoritical research community. Here, we illustrate a two‐step heat treatment of pyrite to synthesize troilite. Pyrite powder was decomposed to pyrrhotite at 1023–1073 K for 4–6 h in Ar; the run product was then retrieved and reheated for 1 h at 1498–1598 K in N2 (gas). The minerals were analyzed with a scanning electron microscope, X‐ray diffraction (XRD) at room temperature, and in situ high‐temperature XRD. The primary observation of synthesis from pyrrhotite to troilite is the shift of a major diffraction peak from ~43.2°2θ to ~43.8°2θ. Troilite spectra matched an XRD analysis of natural meteoritic troilite. Slight contamination of Fe was observed during cooling to troilite, and alumina crucibles locally reacted with troilite. The habitus and size of troilite crystals allowed us to store it as large grains rather than powder; 27 g of pyrite yielded 17 g of stochiometric troilite.
Deeply fractured rocks of meteorite impact structures have been hypothesized as hot spots for microbial colonization on Earth and other planetary bodies. Biosignatures of such colonization are rare, however, and most importantly, direct geochronological evidence linking the colonization to the impact-generated hydrothermal systems are completely lacking. Here we provide timing constraints to microbial colonization of the 77.85 ± 0.78 Ma old Lappajärvi impact structure, Finland, by using coupled microscale stable isotope biosignature detection and radioisotopic dating of vug- and fracture-filling assemblages in impactites. The first detected mineral precipitation at habitable temperatures for life (47.0 ± 7.1 °C) occurred at 73.6 ± 2.2 Ma and featured substantially 34S-depleted pyrite consistent with microbial sulfate reduction. Later stages of vug-mineral precipitation occurred more than 10 Myr later, at gradually lower temperatures, and featured δ13Ccalcite values diagnostic for both anaerobic microbial consumption and production of methane. These insights confirm the capacity of medium-sized (and large) meteorite impacts to generate long-lasting hydrothermal systems, enabling microbial colonization as the crater cools to ambient conditions, an effect that may have important implications for the emergence of life on Earth and beyond.
24 October 2024 in Meteoritics & Planetary Science
The impact origin of the Early Cretaceous (140.82 ± 0.51 Ma) 20‐km diameter Dellen structure was proven in the late 60s based on the discovery of planar deformation features (PDFs) in quartz grains. Although decades have passed, impactites found from the crater have not received much attention. Thus, this study provides a detailed petrological and mineralogical description of impactites from Dellen. Impactites were classified based on mineralogical observations using the latest recommendations of nomenclature. The studied samples include impact melt rocks (clast rich, clast poor, and clast free), suevitic impact breccias, shocked and unshocked granite, and a shatter cone. Altogether, 16 samples with different lithologies were studied using a polarization microscope. Selected samples were studied with an energy dispersive spectroscopy detector attached to the scanning electron microscopy. PDFs were indexed using a four‐axis universal stage from seven samples. Selected samples for PDF studies consisted of clast‐rich impact melt rocks (DEL10, DEL13, D99), suevitic impact breccias (DEL14, DEL16, DEL24), and shocked granite target rock (DEL17). A total of 197 PDF sets in 113 quartz grains were studied, and 186 sets resulted in rational crystallographic orientations. Common orientations include π{101̅2}, ω{101̅3}, z{101̅1}, ξ{112̅2}, and {101̅4}. In suevitic impact breccias and impact melt rocks, ballen silica and plagioclase with checkerboard texture were abundant. The petrographic results in Dellen impactites indicate a range of shock pressures from at least 2 to over 60 GPa, based on diagnostic shock metamorphic features in minerals and the occurrence of impact melt rock.
5 November 2022 in Meteoritics & Planetary Science