15 April 2024 in Aerospace Engineering and Technology
B“Baltic State Technical University “VOENMEH”
Baltic State Technical University “VOENMEH”
SUSaint Petersburg State University
Saint Petersburg State University
+2
The combustion chamber is one of the main components that determine the energy and mass characteristics of the propulsion system. A detailed description of the combustion chambers of some model engines running on kerosene is given. The results of fire tests and numerical studies of combustion chambers of model small-sized gas turbine engines are considered. To qualitatively compare the results of calculations with the data of a physical experiment, annealed colors are used. Based on the results of the research, a map of tem perature distribution on the walls of the combustion chamber was compiled. The internal and external surfaces of the combustion chamber are unevenly colored with tarnished colors. This coloring is a consequence of non-uniform distributions of temperature and concentration of various components of combustion products, and also indicates the formation of a spatial flow in the combustion chamber.
1 August 2021 in Scientific and Technical Journal of Information Technologies, Mechanics and Optics
The study considers the solution of a number of problems of supersonic and hypersonic gas dynamics using a model that takes into account the dissociation and ionization of air. The results of verification and validation of the developed numerical method using various difference schemes (the Roe scheme, Rusanov scheme, AUSM scheme) for discretizing convective flows are presented. The formulation of the mathematical model for high-temperature air uses the presence of equilibrium chemical reactions of dissociation and ionization. For this purpose, at high incoming flow velocities, the Kraiko model is applied, which includes equilibrium chemical reactions in air at high temperatures. To discretize the basic equations, the finite volume method on an unstructured grid is applied. One of the features of the constructed mathematical model is the implementation of the transition between physical and conservative variables. Relationships are given, with the help of which the transition from conservative variables to physical ones and vice versa is carried out when using the high-temperature air model. To ensure the stability of numerical calculations, an entropy correction is introduced. The decrease in entropy in the solution of hyperbolic equations is excluded by introducing an artificial viscosity according to Neumann, as well as by using the Godunov method with an exact solution of the Riemann problem and methods based on the approximate solution of the problem of the decay of an arbitrary discontinuity. A number of problems of supersonic gas dynamics (supersonic flow in a channel with a straight step and supersonic flow around a sphere) are numerically solved taking into account high-temperature effects. The criteria for the accuracy of numerical calculations related to the location of shock-wave structures are discussed. The calculated shock-wave structure of the flow is compared with the data available in the literature, as well as with calculations using the perfect gas model. Some results of numerical calculations are compared with the available experimental data. The shock-wave flow patterns obtained in the framework of the inviscid model, which takes into account the effect of viscosity and its dependence on temperature, and the turbulent flow model are compared. On the basis of numerical simulation data, the influence of viscous effects on the flow characteristics in a channel with a straight step and hypersonic flow around a sphere is considered. The influence of various numerical factors on the shape of the bow shock and the presence of fluctuations in the solution behind the shock is emphasized. As part of the work, a computational module was prepared for the commercial package Ansys Fluent, implemented with the help of user programming tools. The prepared module expands the standard capabilities of commercial software focused on solving computational gas dynamics problems, and is available to Ansys Fluent users for solving hypersonic aerodynamics problems. The developed means of numerical simulation can be useful in the design and optimization of hypersonic aircraft.
1 August 2024 in Scientific and Technical Journal of Information Technologies, Mechanics and Optics
Mathematical and numerical models of the combustion of a fuel mixture in the combustion chamber of a microturbine engine have been developed. Complexity of the models can vary, which gives developers a fairly convenient calculation and design tool. Models allow to take into account the required design tasks by considering and not taking into account various physical processes, and create an optimal complexity model for each specific case. The development of the required configuration begins with the consideration of a simple model of the global kerosene in air combustion reaction without conjugate heat exchange with solids. Step by step, models of extended kinetics, swirling flow, radiation, heat exchange with walls, and the presence of lubricant oil in kerosene are added to the calculation methodology. The results of calculating the wall temperature and combustion completeness were compared with those of JetCat P100-RX and P550-PRO turbojet engines, the integral characteristics of which are well known. In the course of the performed computational and experimental studies, a comparison of the run-off spots on the walls of the combustion chamber with the calculated temperature distributions was performed. A good agreement of the results was obtained for the complete mathematical model. The effect of better cooling of the combustion chamber and increasing the completeness of combustion by twisting the flow behind the compressor is revealed. The effect of the addition of oil to kerosene on an increase in specific fuel consumption by 1–4 % has been determined. The significance of the results obtained lies in the possibility of applying the proposed calculation methodology in engineering practice. The considered modifications of the model represent an important stage in the creation and verification of a mathematical model of in-chamber processes.
31 March 2026 in Eurasian Physical Technical Journal
Increased energy efficiency in the extraction and transportation of highly viscous oil is achieved by reducing its viscosity through heating. Numerical modeling is a powerful tool for developing and analyzing methods to improve heat transfer efficiency and optimize the design of heat exchange devices in the oil and gas industry. To solve this problem, the study uses Reynolds-averaged Navier-Stokes equations supplemented with turbulence models (k–ε, k–ω SST, and Transition SST) capable of accounting for the transition from laminar flow to turbulent flow with variable viscosity. The results of calculations of smooth and spiral pipes are compared, as well as an assessment of the reliability and performance of turbulence models used to simulate the operation of heat exchangers with direct and reverse heat flow. The dependences of the numbers Nu and Re of the oil flow in a washed by water pipe for all three turbulence models are shown in comparison with the corresponding experimental result, indicating the qualitative agreement of the numerical calculation results with the experiment. The results of the comparative analysis showed that the kw SST model most effectively describes the flow movement in the inter-tube space. The Computational Fluid Dynamics calculation data obtained is of practical importance for the design and optimization of heat exchanger structures.
1 April 2024 in Scientific and Technical Journal of Information Technologies, Mechanics and Optics
The possibilities of simulation of viscous incompressible fluid flows with lattice Boltzmann method are considered. Unlike the traditional discretization approach based on the use of Navier–Stokes equations, the lattice Boltzmann method uses a mesoscopic model to simulate incompressible fluid flows. Macroscopic parameters of a fluid, such as density and velocity, are expressed through the moments of the discrete probability distribution function. Discretization of the lattice Boltzmann equation is carried out using schemes D2Q9 (two-dimensional case) and D3Q19 (three-dimensional case). To simulate collisions between pseudo-particles, the Bhatnagar–Gross–Crooke approximation with one relaxation time is used. The specification of initial and boundary conditions (no penetration and no-slip conditions, outflow conditions, periodic conditions) is discussed. The patterns of formation and development of vortical flows in a square cavity and cubic cavities are computed. The results of calculations of flow characteristics in a square and cubic cavity at various Reynolds numbers are compared with data available in the literature and obtained based on the finite difference method and the finite volume method. The dependence of the numerical solution and location of critical points on faces of cubic cavity on the lattice size is studied. Computational time is compared with performance of fine difference and finite volume methods. The developed implementation of the lattice Boltzmann method is of interest for the transition to further modeling non-isothermal and high-speed compressible flows.
1 April 2023 in Scientific and Technical Journal of Information Technologies, Mechanics and Optics
Issues related to the development of tools for mathematical modeling of stationary supersonic flows of an ideal compressible gas with inert particles are considered. A mathematical model is constructed that describes the flow of an inviscid compressible gas with inert particles in a jet flowing from an axisymmetric nozzle into a flooded space. Provided that the flow is supersonic along one of the spatial coordinates, the Euler equations are hyperbolic along this coordinate. For numerical calculations of the gas flow field, the finite volume method and the marching method are used. For integration over the marching direction, the three-step Runge–Kutta scheme is used. The procedure for calculating the flows includes the reconstruction of the values of the desired functions on the faces of the control volumes from the average values over the control volumes and the solution of the problem of the decay of an arbitrary discontinuity (the Riemann problem). The Lagrangian method of test particles is used to describe the dispersed phase. The effects of the reverse influence of particles on the flow of the carrier gas are not taken into account. The effects of viscosity and rarefaction of the gas flow are taken into account only when the gas interacts with particles. Calculation of the trajectories of inert particles is carried out in a known flow field of the carrier gas. The motion trajectories of discrete inclusions in jet flows with strong underexpansion are presented. The influence of the particle size and the coordinates of the particle entry point into the flow on the features of their transfer by the jet stream are discussed. Efficient means of numerical simulation of stationary supersonic flows of an ideal compressible gas with particles in nozzles and jets have been developed. The calculation results are of interest for studying supersonic gas suspension flows around bodies and for calculating oblique shock waves.