Thermo-Hydraulics Division, Electrogorsk Research and Engineering Center for Safety of Nuclear Power Plants, Saint Constantine Street 6, Electrogorsk, Moscow 142530, Russia
Auto-generated profile, based on publicly available information
Vladimir N. Blinkov
Thermo-Hydraulics Division, Electrogorsk Research and Engineering Center for Safety of Nuclear Power Plants, Saint Constantine Street 6, Electrogorsk, Moscow 142530, Russia
In the frame of Tacis Project R2.01/99, which was running from 2003 to 2005, the bubble condenser system of Kola NPP (unit 3) was qualified at the integral test facility BC V-213. Three LB LOCA tests, two MSLB tests, and one SB LOCA test were performed. The appropriate test scenarios for BC V-213 test facility, modeling accidents in the Kola NPP unit 3, were determined with pretest calculations. Analysis of test results has shown that calculated initial conditions and test scenarios were properly reproduced in the tests. The detailed posttest analysis of the tests performed at BC V-213 test facility was aimed to validate the COCOSYS code for the calculation of thermohydraulic processes in the hermetic compartments and bubble condenser. After that the validated COCOSYS code was applied to NPP calculations for Kola NPP (unit 3). Results of Tacis R2.01/99 Project confirmed the bubble condenser functionality during large and small break LOCAs and MSLB accidents. Maximum loads were reached in the LB LOCA case. No condensation oscillations were observed.
A quasi-one-dimensional, five-equation model has been developed on a microcomputer to calculate the behavior of flowing, initially subcooled, flashing liquids. Equations for mixture and vapor mass conservation, mixture momentum conservation, liquid energy conservation, and bubble transport were discretized and linearized semi-implicitly, and solved using a successive iteration Newton method. Closure was obtained through simple constitutive equations for friction and spherical bubble growth, and a new nucleation model for wall nucleation in small nozzles combined with an existing model for bulk nucleation in large geometries. Good qualitative and quantitative agreement with experiment confirms the adequacy of the nucleation models in determining both initial size and number density of nuclei. It is shown that bulk nucleation becomes important as the volume-to-surface ratio of the geometry is increased.