9 December 2019 in Journal of Physics D: Applied Physics
III-nitride deep ultraviolet (DUV) light-emitting diodes (LEDs) have been identified as promising candidates for energy-efficient, environment-friendly and robust UV lighting sources with potential applications in water/air purification, sterilization, and bio-sensing. However, the performance of state-of-art DUV LEDs is far from satisfactory for commercialization due to their low internal quantum efficiency, large current leakage and efficiency droop at high current injection, etc. Extensive efforts have been devoted to properly designing the band structures of such luminescent devices to enhance their output power. In this review, we summarize the recent progress of various energy band designs and of the engineering of DUV LEDs, with particular attention paid to the various approaches in band engineering of electron-blocking layers, quantum wells, quantum barriers and the implementation of many novel structures such as tunnel junctions and ultrathin quantum heterostructures utilized to enhance their efficiency. These inspirational approaches pave the way towards the next generation of greener and more efficient UV sources suitable for practical applications.
1 August 2022 in Applied Physics Letters
ABA F M Anhar Uddin Bhuiyan
A F M Anhar Uddin Bhuiyan
+5
In this work, β-Ga2O3 fin field-effect transistors (FinFETs) with metalorganic chemical vapor deposition grown epitaxial Si-doped channel layer on (010) semi-insulating β-Ga2O3 substrates are demonstrated. β-Ga2O3 fin channels with smooth sidewalls are produced by the plasma-free metal-assisted chemical etching (MacEtch) method. A specific on-resistance (Ron,sp) of 6.5 mΩ·cm2 and a 370 V breakdown voltage are achieved. In addition, these MacEtch-formed FinFETs demonstrate DC transfer characteristics with near zero (9.7 mV) hysteresis. The effect of channel orientation on threshold voltage, subthreshold swing, hysteresis, and breakdown voltages is also characterized. The FinFET with channel perpendicular to the [102] direction is found to exhibit the lowest subthreshold swing and hysteresis.
12 June 2019 in IEEE Photonics Journal
AlGaN-based deep ultraviolet light-emitting diodes (DUV LEDs) suffer from severe quantum confined Stark effect (QCSE) due to the strong polarization field in the quantum wells (QWs) grown on c-plane substrates. In this work, we propose a novel DUV LED structure embedded with graded QWs in which the Al composition was linearly changed to screen the QCSE. A significant increase of the internal quantum efficiency and thus an enhancement of the light output power by nearly 67% can be achieved, attributing to the improvement of the electron-hole wave function overlap ( $\Gamma_{\rm{e}-\rm{hh}}$ ) to 58.6% in the Increased-Al-composition graded QWs, as compared to the QW without grading ( $\Gamma_{\rm{e}-\rm{hh}}$ =40.4%) and reverse grading ( $\Gamma_{\rm{e}-\rm{hh}}$ =33.6%). Further investigations show that the grading profile of the Al composition in the QWs, including either linearly increases or decreases along the growth direction and the thickness of graded QWs, determine the polarization electrical field in the QWs and as a result, significantly affecting the performance of the devices. In the end, a careful optimization of the graded QWs is called. The proposed structure with such unique graded QWs provides us an effective solution to suppress the QCSE effect in the pursuit of high performance DUV emitters.
18 June 2020 in Semiconductor Science and Technology
AlGaN-based deep-ultraviolet light-emitting diodes (DUV LEDs) have been identified as a prospective mercury-free UV source. However, the observation of severe electron overflow and low hole injection efficiency in the conventional DUV LED deteriorates the device performance, attributing to the downward band bending as a result of the strong polarization-induced electric fields between the last quantum barrier (LQB) and the electron blocking layer (EBL). In this study, a composition-graded AlGaN layer with linearly increasing of Al composition from 0.5 to 0.65 is proposed to act as the LQB, replacing the conventional flat LQB to reduce the effective barrier height for hole injection while improving the electron blocking ability. Hence, a considerable enhancement of the output power can be obtained. Moreover, further investigations show that the thickness of graded LQB determine the band bending in the LQB and thus significantly suppress the electron leakage, eventually leading to a boosted output power. The thorough investigation on the LQB could pave the way towards the realization of efficient DUV LEDs of the future.
24 July 2023 in Applied Physics Letters
Understanding the thermal stability and degradation mechanism of β-Ga2O3 metal-oxide-semiconductor field-effect transistors (MOSFETs) is crucial for their high-power electronics applications. This work examines the high temperature performance of the junctionless lateral β-Ga2O3 FinFET grown on a native β-Ga2O3 substrate, fabricated by metal-assisted chemical etching with Al2O3 gate oxide and Ti/Au gate metal. The thermal exposure effect on threshold voltage (Vth), subthreshold swing (SS), hysteresis, and specific on-resistance (Ron,sp), as a function of temperature up to 298 °C, is measured and analyzed. SS and Ron,sp increased with increasing temperatures, similar to the planar MOSFETs, while a more severe negative shift of Vth was observed for the high aspect-ratio FinFETs here. Despite employing a much thicker epilayer (∼2 μm) for the channel, the high temperature performance of Ion/Ioff ratios and SS of the FinFET in this work remains comparable to that of the planar β-Ga2O3 MOSFETs reported using epilayers ∼10–30× thinner. This work paves the way for further investigation into the stability and promise of β-Ga2O3 FinFETs compared to their planar counterparts.
1 March 2019 in IEEE Photonics Journal