Department of Electrical and Computer Engineering, Micro and Nanotechnology Laboratory, University of Illinois at Urbana-Champaign 2 , Urbana, Illinois 61801, USA
Auto-generated profile, based on publicly available information
Hsien-Chih Huang
Department of Electrical and Computer Engineering, Micro and Nanotechnology Laboratory, University of Illinois at Urbana-Champaign 2 , Urbana, Illinois 61801, USA
In this work, β-Ga2O3 fin field-effect transistors (FinFETs) with metalorganic chemical vapor deposition grown epitaxial Si-doped channel layer on (010) semi-insulating β-Ga2O3 substrates are demonstrated. β-Ga2O3 fin channels with smooth sidewalls are produced by the plasma-free metal-assisted chemical etching (MacEtch) method. A specific on-resistance (Ron,sp) of 6.5 mΩ·cm2 and a 370 V breakdown voltage are achieved. In addition, these MacEtch-formed FinFETs demonstrate DC transfer characteristics with near zero (9.7 mV) hysteresis. The effect of channel orientation on threshold voltage, subthreshold swing, hysteresis, and breakdown voltages is also characterized. The FinFET with channel perpendicular to the [102] direction is found to exhibit the lowest subthreshold swing and hysteresis.
Understanding the thermal stability and degradation mechanism of β-Ga2O3 metal-oxide-semiconductor field-effect transistors (MOSFETs) is crucial for their high-power electronics applications. This work examines the high temperature performance of the junctionless lateral β-Ga2O3 FinFET grown on a native β-Ga2O3 substrate, fabricated by metal-assisted chemical etching with Al2O3 gate oxide and Ti/Au gate metal. The thermal exposure effect on threshold voltage (Vth), subthreshold swing (SS), hysteresis, and specific on-resistance (Ron,sp), as a function of temperature up to 298 °C, is measured and analyzed. SS and Ron,sp increased with increasing temperatures, similar to the planar MOSFETs, while a more severe negative shift of Vth was observed for the high aspect-ratio FinFETs here. Despite employing a much thicker epilayer (∼2 μm) for the channel, the high temperature performance of Ion/Ioff ratios and SS of the FinFET in this work remains comparable to that of the planar β-Ga2O3 MOSFETs reported using epilayers ∼10–30× thinner. This work paves the way for further investigation into the stability and promise of β-Ga2O3 FinFETs compared to their planar counterparts.
5 January 2020 in ACS Applied Electronic Materials
Gallium phosphide (GaP) is an important optical material due to its visible wavelength band gap and high refractive index. However, the bandgap of the thermodynamically stable zinc blende GaP is indirect, but wurtzite (WZ) structure GaP is direct bandgap. In this work, we demonstrate high-quality and dense GaP vertical nanopillar (NP) array directly on Si (111) substrates through selective area epitaxy (SAE) by MOCVD for the first time, through systemic studies of the effect of TMGa flow rate, growth temperature, and V/III ratio. Uniform GaP NPs are grown over a patterned $400\,\,\mu \text{m}\,\,\times 400\,\,\mu \text{m}$ area with 97.5% yield. Arrays of GaP vertical p-i-n NP diodes are demonstrated with a ideality factor and rectification ratio of 3.7 and 103, respectively. With the high yield of hexagonal structure and electrically proven device quality of GaP NPs through this growth method, this work represents a significant step in achieving GaP NP based optoelectronic devices, such as micro-LEDs emitting in the green wavelength range.