10 May 2021 in IEEE Transactions on Electron Devices
The 220-GHz continuous wave (CW) folded waveguide (FWG) traveling wave tube (TWT) is presented as the high-power amplifier for the terahertz (THz) communication system in this article. This tube is designed and fabricated including FWG circuit, electron gun, periodical permanent magnet system, coupling window, and thermal management structure. The test results show that with the pencil beam of 20.5 kV and 52.4 mA, the output power is 16 W and the corresponding bandwidth is 7 GHz from 213 to 220 GHz, and the maximum power and the corresponding gain are 30 W and 31.2 dB at the frequency of 217 GHz.
13 June 2023 in IEEE Electron Device Letters
A slotted piecewise sine waveguide (SPWSWG) is suggested as the slow wave structure (SWS) to develop the terahertz traveling wave tube (TWT). This letter is the first to report the SPWSWG SWS with the advantages of flat dispersion and large coupling impedance from our calculation. Based on this novel SWS, a wideband 220-GHz TWT has been designed, fabricated and tested. The cold test results show that the reflection parameters at the input and output port of the TWT are less than -15.2 dB in the frequency range of 209-235 GHz. Moreover, the hot test results demonstrate that the maximum saturated output power reaches 28.6 W at 215 GHz and the 3-dB bandwidth exceeds 15.5 GHz, which are basically consistent with the simulation results.
18 July 2024 in IEEE Transactions on Electron Devices
In this article, we propose a low reflection folded waveguide (LRFWG) as the slow wave structure (SWS) for the development of a terahertz (THz) traveling-wave tube (TWT). Our simulation results show that the LRFWG SWS has lower reflection and larger coupling impedance compared to the conventional folded waveguide (FWG) SWS over a wide frequency range. Using this modified SWS, we have designed, simulated, and manufactured a wide-band high-power TWT operating in the G-band. The cold test results demonstrate that the reflection parameters at the input and output ports of the TWT are less than -13.8 dB from 200 to 240 GHz, confirming the effectiveness of our proposed structure. In addition, the hot test results show that the maximum output power of the 220 GHz LRFWG TWT amplifier reaches 31.2 W at 220 GHz, with a 3 dB bandwidth exceeding 23 GHz. The power-bandwidth product of the device is greater than 717.6 W $\cdot $ GHz, providing a demonstration of a wideband high power THz source.
1 November 2022 in IEEE Microwave and Wireless Technology Letters
A double flat-roofed sine waveguide (DFRSWG) slow wave structure (SWS) with low loss for 220-GHz traveling-wave tube (TWT) has been demonstrated in this letter. Through the simulation method, it is inferred that this structure has a large coupling impedance and excellent transmission properties. Besides, the experimental results demonstrate that the transmission loss of the circuit is only 0.62–0.75 dB/cm and the return loss is more than 19.3 dB in the frequency band of 210–250 GHz. Eventually, a two-section DFRSWG interaction circuit is designed to achieve stable device performance. Based on the particle-in-cell (PIC) simulation results, it can be predicted that the DFRSWG TWT can generate the maximum output power of 235 W at 220 GHz, which corresponds to a gain of 36.72 dB and an electronic efficiency of 6.06%.
2 November 2022 in IEEE Transactions on Electron Devices
In this article, the design and test results of an ${X}$ -band high-efficiency long-pulse gyrotron traveling wave tube (gyro-TWT) based on a lossy ceramic-loaded high-frequency (HF) circuit with an operation mode of TE11 are presented. In the design, a pill-box input window, a magnetron injection gun (MIG), a room-temperature coil magnet, and a double-disk output window are adopted. A single-stage depressed collector (SSDC) is applied to enhance the efficiency of this amplifier and to reduce the dissipated beam power. In the hot test, with the beam parameter of 70 kV and 5 A, and the depressed voltage of 20 kV, this ${X}$ -band gyro-TWT produces 104 kW, 1-s long-pulse radiations at 7.8 GHz, corresponding to a saturation gain of 32.2 dB and a maximum overall efficiency of 41.6%, the measured −3-dB power bandwidth exceeds 0.4 GHz.
21 April 2025 in IEEE Electron Device Letters
In this letter, we report a novel G-band high-power traveling wave tube (TWT) using a modified slot-loaded folded waveguide (SLFWG) slow-wave structure (SWS). Firstly, it can be found that the coupling impedance of the modified SWS is greatly improved compared with the conventional structure by simulation results. Next, the whole tube is designed and fabricated using the SLFWG SWS. Finally, under the condition of 10% duty cycle, the experimental results show that the device has a maximum output power of 215 W at the frequency of 219 GHz, a 3-dB bandwidth of more than 3 GHz, and a power-bandwidth product of 666.5 W·GHz, which is basically consistent with the simulation results.