24 April 2023 in IEEE Access
We investigate the control challenges in grinding circuits—slow dynamics, long dead times, variable coupling— and the controller tuning challenge, that is, the difficulty in translating operating goals into tuning goals and closed-loop performance. A tuning algorithm for DMC (dynamic matrix control), suitable for the mineral processing industry, is proposed. The tuning problem is posed as a multiobjective optimization problem, in which the tuning goals are directly related to the desired closed-loop performance of process variables. The problem is solved using a compromise optimization, which minimizes the Euclidian distance between a feasible solution and the Utopia solution. Three case studies are presented, which validate the tuning algorithm for DMC in linear and non-linear grinding circuit models. The closed-loop performance obtained with the proposed tuning algorithm is compared to the one obtained through a benchmark tuning technique from the literature. The proposed tuning method has the following features: i) it shapes the closed-loop response according to the goal definitions for linear systems; ii) it requires tailored initial guesses and search spaces to converge to a stabilizing solution in non-linear applications; and iii) it allows the user to specify the desired closed-loop performance behavior in the tuning procedure, allowing the implementation of an adequate controller for each situation.
13 December 2023 in IEEE Transactions on Instrumentation and Measurement
Conveyor belts are the most effective way to transport ore in a mining complex. The ore that comes from the mining areas can be heterogeneous in size and type. As the ore has to pass through several processing stages, online information about the ore type and degree of fragmentation can help improve mineral processing for both safety and efficiency. Current instrumentation systems are expensive and require frequent calibration and maintenance. This article presents a novel intelligent instrument for online recognition of type and degree of fragmentation. A 2-D light detection and ranging (LiDAR) sensor along with machine learning (ML) techniques was used to estimate the characteristics of iron ore particles on conveyor belts. An experiment was conducted using several types of ore and granulometry. Five ML models were compared by means of statistical methods, including average accuracy and normality and hypothesis tests. Among them, the random forest (RF) models achieved the highest rate of accuracy, 93.81% for ore type and 85.52% for degree of fragmentation. These models were improved by a voting mechanism that resulted in a reduction of classification errors of 93.3% for ore type and 99.2% for degree of fragmentation. These findings demonstrate that the system has the potential for improving mineral processing controls and heightening operational safety within the mining sector.
18 December 2024 in SoftwareX
YCYasmin Adriane de Paula Campos
Yasmin Adriane de Paula Campos
PPPaulo Haron da Silva Pereira
Paulo Haron da Silva Pereira
RDRobson Aparecido Duarte
JPJosé Manuel Gonzalez Túbio Perez
José Manuel Gonzalez Túbio Perez
1 January 2021 in Procedings Do Xv Simpósio Brasileiro de Automação Inteligente
WPWashington J. S. Pacífico
Washington J. S. Pacífico
Neste artigo é proposto um sistema de controle baseado em Máquinas de Estado Finita (MEF) para aumento da produtividade da planta de beneficiamento de minério de ferro da Vale S.A. em Carajás - PA. Os circuitos de pilha de pebble, britagem terciária e peneiramento terciário foram simulados no software IDEAS (Andritz Automation), calibrado e validado com informações reais da planta. Os circuitos simulados são usados como ambiente virtual para desenvolvimento e teste das MEF propostas. Os resultados de simulação indicam que o sistema de controle proposto incrementa a taxa de produção entre os processos de peneiramento secundário e a britagem terciária em 15%. Este valor corresponde a um aumento de produtividade de 3,4 milhões de toneladas de minério de ferro por ano.