7 February 2022 in IEEE Access
Voltage fluctuation and power mismatch which are caused by the decentralization, randomness, and intermittence of distributed energy resource along with load variability cause severe impacts on the security and quality of power network operation. Aiming at alleviating this issue, the structure of an AC/DC hybrid microgrid based on solid-state transformer is presented in this paper. A proper control coordination is developed to guarantee stable and reliable operation of the system. An energy management strategy is proposed to coordinate the power flow among the solid-state transformer, AC microgrid, DC microgrid and energy storage and to effectively suppress the fluctuation of the DC bus voltage. A novel adaptive droop control for the energy storage is proposed to prolong the supercapacitor life and achieve an optimum economic benefit to consumers. The droop coefficient is obtained by fuzzy logic controller of which the state of charge of the supercapacitor and unit-time electricity charge are assumed to be the input parameters. Simulation attest the feasibility of the proposed control coordination and energy management strategy.
28 December 2021 in Global Journal of Energy Technology Research Updates
This paper presents a novel seamless switching technology between different operating conditions of the Unified Power Quality Conditioner (UPQC) with the energy storage system. Frequent start and stop of the series inverter will cause shock and loss under the conventional control method. Moreover, it is a key issue to achieve seamless switching when the UPQC operating condition changes. This paper proposes an improved power angle control (PAC) method to solve these problems. An agile power angle is calculated by this method under stable operating conditions. This feature enables the series inverter to share the load reactive power with the shunt inverter. On the other hand, both the series and shunt inverters are in an easy-to-switch operating state which can help achieve better seamless switching between different operating conditions. Simulation results show the shunt inverter capacity can be reduced up to 47% due to the reactive power sharing by both the inverters which means the reactive power burden of the shunt inverter is great lightened. It is also found that the switching time is about 300μs faster and the maximum voltage fluctuation amplitude is about 90V smaller under improved PAC than the conventional control method.