21 November 2019 in Journal of Lightwave Technology
A mode-locked high pulse energy fiber laser with a linear cavity by using an all-fiber structured graded index multimode fiber (GIMF) based saturable absorber (SA) is presented. The saturable absorption effect of the SA is based on the nonlinear multimode interference (NL-MMI). This is the first time to use the GIMF-based SA in a mode-locked all-fiber laser with a linear cavity. The stable fundamental mode-locking operation can still be maintained at the maximum pump power. The output solitons have the center wavelength, spectral width, pulse duration, and repetition rate of 1571 nm, 4 nm, 675 fs, and 11.69 MHz, respectively. The maximum average output power reached is 61.4 mW, corresponding to the pulse energy up to 5.26 nJ and the pulse peak power of 7.79 kW. The proposed GIMF-based SA opens a promising way for practical fiber-integrated mode-locker for large pulse energy fiber laser technology.
18 January 2025 in Chemical Engineering Journal
2 December 2023 in Nano Research
Ultra-thin electromagnetic wave (EMW) absorbers present challenging demands on EMW absorption performance. Drawing inspiration from heather leaf structures, this study introduces an innovative design strategy for EMW absorbing material, proposing biomimetic leaf SnO2 structures (bio-SnO2) on carbon fabric (CF). By employing leaf-shaped SnS2 as precursors, biomimetic leaf SnO2 nanostructures are constructed on CF surface after a simple thermal treatment, resulting in bio-SnO2@CF composite. Experimental results indicate that bio-SnO2@CF exhibits an exceptional minimum reflection loss of −54.8 dB at an incredibly thin thickness of 1.2 mm. Radar cross section (RCS) simulations further validate the outstanding EMW attenuation ability of bio-SnO2@CF, attaining a maximum RCS reduction value of 16.9 dBm2 at an incident wave angle of θ = 0°. This novel research showcases the biomimetic structural design strategy and its remarkable function in enhancing the EMW absorbing performance at ultra-thin absorber thickness.
13 February 2006 in Chinese Journal of Chemistry
5 February 2024 in Journal of Colloid and Interface Science
In this work, a straightforward method for synthesizing fullerene derivatives with tentacle structures has been explored for monitoring environmental humidity, which involves introducing sulfonate onto the fullerenes. The structure and number of polar groups in three fullerene derivatives determined by a series of structural tests greatly affect their hydrophilicity and morphology, resulting in changes in humidity sensitive properties. In particular, the hysteresis and response time of the sensors display a great correlation with hydrophilicity. C60-Ho, the best performing derivative of this work, has exhibited high response values (∼3500 times), good linearity (R2 = 97.3 %), and rapid response/recovery times (0.3/4.4 s), making it suitable for various applications such as non-contact detection of respiration, finger distance, and soil humidity.