R. V. Kotsyubansky

R. V. Kotsyubansky

Auto-generated profile, based on publicly available information

R. V. Kotsyubansky

Інститут механіки та автоматики агропромислового виробництва Національної академії аграрних наук України

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 December 2021 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
VSViktor Sheichenko
Viktor Sheichenko
VVVolodymyr Volskyi
Volodymyr Volskyi
RKRostyslav Kotsiubanskyi
Rostyslav Kotsiubanskyi
VDViktor Dnes
Viktor Dnes
MSMisha Shevchuk
Misha Shevchuk
Olga DrozhchanaOlga Drozhchana
Olga Drozhchana
This paper reports a study of the technological process of grinding plant residues of sunflower and the causal relationships of factors that form the system of quality indicators. The necessary prerequisites for determining rational modes and parameters of the roll crusher have been devised. A prototype of the roll crusher was designed and fabricated, in which the cutting knives are arranged along the entire width of the grip in a staggered manner, with the possibility to change the angle of inclination to the axis of drum rotation in the range of 5...20°. It was established that in the case of the right-side arrangement of the cutting edge of knives, the highest total level of the percentage of crushed stems in the range of 101‒150 mm with an additional load weighing 800 kg exceeded by 1.58 times the corresponding indicators of the roll with an additional load of 600 kg. The largest overall value of the percentage of crushed stems in the range of 0‒200 mm when additionally loading the roll with 800 kg was 1.13 times higher than the corresponding indicators of the roll with an additional load of 600 kg. In the range of 0‒200 mm, with an additional load on the roll of 600 kg, at the left-side arrangement of the cutting edge of the knives of the roll, higher total percentage of crushed stems was observed compared to the right-side arrangement. At a speed of 7.45 km/h, 13.6 km/h, the cumulative value of the percentage of crushed stems exceeded the corresponding indicators at the right-side arrangement of knives by 1.09 times, at the speed of 18.6 km/h – by 1.04 times, at the speed of 22 km/h – by 1.04 times, respectively. It has been noted that at the left-side arrangement of the cutting edge of the knives of the roll, the percentage of crushed stems in the range of 51‒100 mm, with an additional load of 600 kg, exceeded the corresponding indicators with an additional load of 800 kg. At the speed of 10.08 km/h, it was exceeded by 1.9 times; at the speed of 13.6 km/h – by 1.44 times; at the speed of 18.6 km/h – by 1.96 times; at the speed of 22 km/h – by 1.99 times, respectively

1 July 2023 in Mechanics and automatics of agroindustrial production
Verified
Journal Article
Closed access
VVV. A. Volsky
V. A. Volsky
RKR. V. Kotsyubansky
R. V. Kotsyubansky
Purpose. Generalization of world and domestic experience in the technical and technological support of modern combined tools for crushing plant residues simultaneously with soil cultivation and the prospects for their development. Methods. The methodology of research is based on the information and logical analysis of domestic and foreign scientific and technical sources of information regarding the current state of technical and technological support for grinding plant residues simultaneously with soil treatment. Results. An analysis of the world and domestic use of combined tools for grinding plant residues simultaneously with soil cultivation has been carried out and the prospects for their development have been studied. Conclusions. The use of combined units for grinding plant residues simultaneously with soil cultivation ensures more effective control of pests and plant diseases, reduces uneven grinding of coarse crops, energy costs, and intensifies the processes of grinding and earning. One of the possible directions for the development of tools for grinding plant residues is the use of double-row grinders in combined tillage machines. This intensifies the process of grinding the crop residues of coarse crops. Keywords: plant residues, grinding, earning of plant residues, tillage, combined aggregate.

24 June 2022 in Вісник Полтавської державної аграрної академії
Verified
Journal Article
Closed access
PDF file
ВШВ. О. Шейченко
В. О. Шейченко
ВВВ. А. Вольський
В. А. Вольський
РКР. В. Коцюбанський
Р. В. Коцюбанський
ЮСЮ. Б. Скоряк
Ю. Б. Скоряк
Nataliia PriliepoNataliia Priliepo
Nataliia Priliepo
За допомогою аналітичного способу досліджено процес взаємодії ножа котка-подрібнювача ізрослинно-ґрунтовим середовищем. Розглянуто варіант коливального руху центру С котка упоздовжньо-вертикальній площині за умови незначної довжини барабану та його порівняноневисокій вазі. Відмічено, що за умов, коли кількість рядів ножів у конструкції котка та їхпараметри уможливлюють приблизно однакове значення довжини кола між верхівками ножів ізйого висотою (максимальним значенням глибини занурення ножа у рослинно-ґрунтове середовище),спостерігається варіант руху центру мас С у вигляді почергового опускання та піднімання. Цеможливо, коли контакт із рослинно-ґрунтовим середовищем відбувається безперервно. Відміченіособливості руху центру С будуть мати місце як за умови невеликої глибини занурення ножів урослинно-ґрунтове середовище, так і при значних значеннях глибини. Встановлено вплив кута β (кутміж вектором швидкості точки К і вертикаллю) на умови проникнення ножа в рослинно-ґрунтовесередовище. За умови збігу напрямку встановлення ножа із радіусом барабана встановленозалежність, згідно з якою з'ясовано вплив на кут β конструкційних параметрів (радіусу барабанаб r , ширини ножа н h , кута  ) та технологічного параметру 1 h , яким визначено відстань від точкиК до горизонтальної лінії найбільшого проникнення ножів у рослинно-ґрунтове середовище. За умовзміщення на кут   напрямку встановлення ножів відносно радіуса барабана котка у бік, щозбігається із напрямком обертання барабану, встановлено залежність, згідно з якою з’ясовано впливна кут β' (кут між вертикаллю та направленням швидкості прикінцевої точки ножа К'),конструкційних параметрів (радіуса барабана б r , ширини ножа н h , кутів  та   ), а такожтехнологічного параметру 1 h , яким визначено відстань від точки К' до горизонтальної лінії найбільшого проникнення ножів у рослинно-ґрунтове середовище.

1 January 2020 in Mehanization and electrification of agricultural
Verified
Journal Article
Closed access
VVV. A. Volsky
V. A. Volsky
RKR. V. Kotsyubansky
R. V. Kotsyubansky
Annotation Purpose. Increasing the efficiency of crushing operations and embedding coarse-stem plant residues into the soil due to the improvement of the technological process using a combined unit containing a crusher roller, disc working bodies and a compactor roller. Methods. The research was carried out using synthesis analysis, correlation-regression analysis, which makes prediction of the output quality and energy indicators for certain operating conditions and certain parameters of the combined machine for processing corn stubble. The rational values of design parameters and operating modes were determined based on the results of solving the problem of optimizing energy costs and quality indicators within one module with established internal factor relationships and relationships that arise when working bodies interact with the plant environment and soil. Results. A structural and functional diagram of a combined unit has been developed, in which a shredder roller in combination with a disc harrow and a compactor roller improves the quality of processing operations with simultaneous crushing and harvesting plant residues into the soil. The trailed combined unit contains a towing device, a frame, support wheels for moving in the transport position, a section of crusher rollers, a section of cut spherical disc working bodies, a section of solid spherical disc working bodies, mechanisms for adjusting the angles of attack of sections of spherical discs, sections of compaction rollers. Conclusions 1. The technological process of crushing (up to 5 cm) of plant residues of coarse-stem crops, their earning, mixing with the soil and spreading over layers to a depth of 25 cm, rolling the treated soil and leveling the field surface has been improved, reduces the development of corn moth. 2. A structural-functional diagram has been developed and a combined unit has been manufactured, the main difference of which is the use of a mounted module-roller-grinder, which intensifies the grinding process and earns coarse-stem plant residues into the soil, increases the quality indicators of the technological operation by the amount of crushed plant residues less than 5 cm to 70–80%. Keywords: corn, plant debris, grinding, making plant debris, tillage, combined unit.

3 March 2025 in Podilian Bulletin Agriculture Engineering Economics
Verified
Journal Article
Open access
PDF file
ВВВ. А. Вольський
В. А. Вольський
РКР. В. Коцюбанський
Р. В. Коцюбанський
ВТВ. М. Третяк
В. М. Третяк
ВБВ. С. Бончик
В. С. Бончик
У статті запропоновано та перевірено нові підходи до створення техніки, які найкраще відповідають сучасним вимогам, сприяючи вирішенню базових проблем механізації польових робіт. Доведено, що використання регульованого електроприводу в умовах інтенсивного насичення мобільних сільськогосподарських агрегатів засобами інформатизації та автоматизації відкриває можливість створення техніки нового покоління з високим рівнем адаптації до агротехнічних вимог у рослинництві, що дає можливість значно підвищити рентабельність сільськогосподарського виробництва. Під час проведення посівних робіт досить часто відбувається порушення заданих норм посіву, нерівномірний розподіл насіння на площі, що засівається, або рядку, порушується контроль кількісних допусків на відхилення відстаней між насінням. У зв’язку із цим виникає ефект взаємного пригнічення, за якого рослини не отримують достатньої кількості поживних речовин через близьке розташування кореневих систем, що надалі знижує врожайність і якість одержуваного насіння. Сучасний розвиток елементної бази силового електричного приводу та систем його керування дає змогу за невеликої вартості одержувати необхідну точність виконання технологічних процесів. Стрімке впровадження систем позиціонування та геолокації дає змогу з необхідною рентабельністю впроваджувати їх у сільськогосподарські технології рослинництва. Однією з основних технологічних операцій, від якої залежить рентабельність виробництва в рослинництві, є сівба. Тому вдосконаленням посівних комплексів із метою покращення якості сівби та одержання кращої урожайності займаються провідні світові фірми. На підставі аналізу світового досвіду запропоновано методи визначення конструкційних вимог щодо впровадження регульованого електроприводу висіваючих апаратів для оперативного контролю зміни норми висіву з максимальним використанням вітчизняної елементної бази. Приводи висівних апаратів здійснюють обертання робочих органів за рахунок прямого зв’язку з колесом сівалки через механічні передачі. Для регулювання норми посіву застосовуються механічні коробки з фіксованим набором зубчастих передач або варіатори пасові з установленим діапазоном регулювання передавального відношення. Механічні приводи мають низку недоліків: жорсткий зв’язок із висівним апаратом без компенсації буксування коліс сівалки та ривків під час руху, прослизання ременя варіатора. Найбільший вплив зазначених недоліків проявляється за недотримання оператором МТА стабільного швидкісного режиму під час виконання технологічної операції посіву. Виключення негативного впливу механічних передач на висівний апарат можливе за рахунок виключення прямого зв’язку з колесом сівалки та застосування в приводах елементів із числовим програмним керуванням, які будуть узгодити швидкість переміщення сівалки з частотою обертання висівного апарату з урахуванням коефіцієнта буксування, що змінюється, і характеру руху енергозасобу, забезпечуючи точність процесу без усереднення всіх значних властивостей. Таким чином, дослідження та розроблення технічних засобів для реалізації якісного посіву насіння зернових культур є актуальним та практично значущим завданням.

1 January 2024 in Mechanics and automatics of agroindustrial production
Verified
Journal Article
Closed access
IUINSTITUTE of MECHANICS and AUTOMATICS of AGROINDUSTRIAL PRODUCTION of the NATIONAL ACADEMY of AGRARIAN SCIENCES of UKRAINE
INSTITUTE of MECHANICS and AUTOMATICS of AGROINDUSTRIAL PRODUCTION of the NATIONAL ACADEMY of AGRARIAN SCIENCES of UKRAINE
VNV. A. Nasonov
V. A. Nasonov
VKV. M. Korniushyn
V. M. Korniushyn
RKR. V. Kotsiubanskyi
R. V. Kotsiubanskyi
AFA. I. Fenenko
A. I. Fenenko
Purpose. Determine the dependence of tillage quality indicators and fuel consumption on the settings of the unit with the new VT-3.1 implement. Methods. Experimental. Standard methods were used to measure the depth of cultivation, crumbling, surface ridge, soil hardness and moisture and fuel consumption at different angles of attack of the disc working bodies of the tool. Results. Indicators of the quality of tillage and fuel consumption at different angles of attack of the disc working bodies of the tool are determined. It has been established that with an increase in the angles of attack, the quality of soil crumbling improves, the depth of cultivation and fuel consumption increases. Conclusions. The VT-3.1 implements have a wide range of adjustment of the angles of attack of the disc working bodies (from 0 to 25º), due to which it can be used for shallow vertical tillage (angles of attack 0–8º), for stubble breaking (10–15º), or deep disking of soil at higher angles of attack. With an increase in the angle of attack of the working bodies from 12º to 24º, the average depth of cultivation increases from 6.4 ± 2.7 cm to 13.3 ± 3.3 cm, and the crumbling of the soil improves. At the same time, fuel consumption increases from 3.3 to 11.25 l/ha. The crest of the surface in the experiments did not exceed 3 cm. Keywords: gun, soil, tests, indicators, angle of attack.