В. С. Бончик

В. С. Бончик

Auto-generated profile, based on publicly available information

В. С. Бончик

Заклад вищої освіти «Подільський державний університет

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2023 in Engineering, Energy, Transport AIC
Verified
Journal Article
Closed access
VDVasyl Duganets
Vasyl Duganets
SHSergiі Hrushetskyі
Sergiі Hrushetskyі
OTOleksii Tokarchuk
Oleksii Tokarchuk
VBVitalii Bonchyk
Vitalii Bonchyk
PFPavlo Fedirko
Pavlo Fedirko
The article indicates the main problems connected with the technology of harvesting grain and leguminous crops (wheat, barley, soybeans, peas) and other crops, as the machine operator often encounters a number of technological and constructive malfunctions that prevent proper threshing of those or other crops, directing the harvesting process to significant expenditure of time and labor, and at the same time to crop losses. An analysis of the main malfunctions of structures that occur during the harvesting of grain, leguminous and other crops, both of the combine itself and of the headers for them, was made. This is especially emphasized during harvesting with high humidity, which significantly worsens the conditions for harvesting crops, and thereby increases the likelihood of frequent emergency stops of grain harvesters. Constructive and technological solutions have been revealed that allow harvesting various crops with minimal possible losses. Based on the given analysis of structures, the possibility of effective use of grain harvesters during the implementation of agrotechnical evaluation indicators, i.e. productivity, throughput capacity of the thresher, grain losses, as well as the avoidance of regular stoppages related to malfunctions, which should be paid special attention, is considered. CLAAS LEXION combine harvesters designed for harvesting grain, legumes and other crops, including soybean and rapeseed, are the basis of the analysis. The analysis of the main malfunctions and ways to improve the performance of CLAAS LEXION combine harvesters shows that during their use in production conditions for harvesting grain, legumes and other crops, positive results, high quality and reliability of work will be obtained, and at the same time increasing productivity due to the avoidance of emergency stops.

3 March 2025 in Podilian Bulletin Agriculture Engineering Economics
Verified
Journal Article
Open access
PDF file
ВВВ. А. Вольський
В. А. Вольський
РКР. В. Коцюбанський
Р. В. Коцюбанський
ВТВ. М. Третяк
В. М. Третяк
ВБВ. С. Бончик
В. С. Бончик
У статті запропоновано та перевірено нові підходи до створення техніки, які найкраще відповідають сучасним вимогам, сприяючи вирішенню базових проблем механізації польових робіт. Доведено, що використання регульованого електроприводу в умовах інтенсивного насичення мобільних сільськогосподарських агрегатів засобами інформатизації та автоматизації відкриває можливість створення техніки нового покоління з високим рівнем адаптації до агротехнічних вимог у рослинництві, що дає можливість значно підвищити рентабельність сільськогосподарського виробництва. Під час проведення посівних робіт досить часто відбувається порушення заданих норм посіву, нерівномірний розподіл насіння на площі, що засівається, або рядку, порушується контроль кількісних допусків на відхилення відстаней між насінням. У зв’язку із цим виникає ефект взаємного пригнічення, за якого рослини не отримують достатньої кількості поживних речовин через близьке розташування кореневих систем, що надалі знижує врожайність і якість одержуваного насіння. Сучасний розвиток елементної бази силового електричного приводу та систем його керування дає змогу за невеликої вартості одержувати необхідну точність виконання технологічних процесів. Стрімке впровадження систем позиціонування та геолокації дає змогу з необхідною рентабельністю впроваджувати їх у сільськогосподарські технології рослинництва. Однією з основних технологічних операцій, від якої залежить рентабельність виробництва в рослинництві, є сівба. Тому вдосконаленням посівних комплексів із метою покращення якості сівби та одержання кращої урожайності займаються провідні світові фірми. На підставі аналізу світового досвіду запропоновано методи визначення конструкційних вимог щодо впровадження регульованого електроприводу висіваючих апаратів для оперативного контролю зміни норми висіву з максимальним використанням вітчизняної елементної бази. Приводи висівних апаратів здійснюють обертання робочих органів за рахунок прямого зв’язку з колесом сівалки через механічні передачі. Для регулювання норми посіву застосовуються механічні коробки з фіксованим набором зубчастих передач або варіатори пасові з установленим діапазоном регулювання передавального відношення. Механічні приводи мають низку недоліків: жорсткий зв’язок із висівним апаратом без компенсації буксування коліс сівалки та ривків під час руху, прослизання ременя варіатора. Найбільший вплив зазначених недоліків проявляється за недотримання оператором МТА стабільного швидкісного режиму під час виконання технологічної операції посіву. Виключення негативного впливу механічних передач на висівний апарат можливе за рахунок виключення прямого зв’язку з колесом сівалки та застосування в приводах елементів із числовим програмним керуванням, які будуть узгодити швидкість переміщення сівалки з частотою обертання висівного апарату з урахуванням коефіцієнта буксування, що змінюється, і характеру руху енергозасобу, забезпечуючи точність процесу без усереднення всіх значних властивостей. Таким чином, дослідження та розроблення технічних засобів для реалізації якісного посіву насіння зернових культур є актуальним та практично значущим завданням.

30 November 2018 in Podilian Bulletin Agriculture Engineering Economics
Verified
Journal Article
Open access
PDF file
PFP. P. Fedirko
P. P. Fedirko
ВКВ. О. Кроль
В. О. Кроль
VBV. S. Bonchyk
V. S. Bonchyk
The article presents the study results of the anaerobic materials effect on the strength of threaded connections in the repair of machinery and equipment. Their use is the simplest, most economical and reliable method of fixing and restoring threaded connections. The basis of the anaerobic compositions is polymerization compounds of the acrylic series, most often dimethacrylic and polyalkylene glycol ethers, which are characterized by a high conversion rate into spatially cross-linked polymers. Unlike mechanical methods of fixation and recovery, anaerobic materials completely fill the space between the threads of the spiral. This significantly increases the friction between the parts of the connection, improves the protection of the metal of the interface against corrosion, increases the torque when unscrewing in relation to the tightening torque, increases the resistance of the connection to the action of vibration, shock, shock loads. For the research, anaerobic thread locks were purchased, which were tested according to the same procedure and, after 24 hours at room temperature, each connection was clamped in a vice in turn so that the head of the torque wrench captures only the top nut, which had to be unscrewed. The rate of hardening of anaerobic adhesives is influenced by the size of the gaps between the combined surfaces, temperature, cleaning quality, the nature of the coating, etc. It has been established that the presence of polymerized anaerobic materials in the contact zone of parts significantly increases the strength of the joints. The conducted studies allowed to verify in practice the conformity of the tested anaerobic clamps of threaded connections to the stated parameters, to delineate the scope of their application. So, anaerobic adhesives for fixing threaded connections allow you to fix screws, nuts, bolts and pins to protect against loosening and loosening due to vibration

10 July 2024 in Podilian Bulletin Agriculture Engineering Economics
Verified
Journal Article
Open access
PDF file
ПФП. П. Федірко
П. П. Федірко
ВДВ. І. Дуганець
В. І. Дуганець
ВБВ. С. Бончик
В. С. Бончик
МСМ. О. Синчак
М. О. Синчак
У роботі представлені результати досліджень методів відновлення отворів корпусних деталей. Встановлена перспективність впровадження у виробництво технологічного процесу відновлення спрацьованих посадкових отворів корпусних деталей установкою згортних втулок на клею. Під час експлуатації з вини агрегатів трансмісії відбувається від 20 до 40% всіх відмов, а на долю корпусних деталей припадає близько 16%. Найбільша повторюваність дефектів характерна для посадкових отворів під підшипники та стакани. Вибір способу відновлення залежить від багатьох факторів. Для реалізації кожного способу відновлення розроблені та впроваджені різноманітні конструкції устаткування та пристроїв, що дають змогу найбільш повноцінно реалізувати той чи інший спосіб. Запропоновано спосіб відновлення посадкових отворів у корпусних деталях установкою згортних втулок на клею з подальшим розкочуванням. Мета розкочування – підвищення міцності посадки втулки в корпусі завдяки повному заповненню клеєм мікронерівностей; створення залишкових стискаючих напруг у корпусі. З розкочуванням збільшується щільність стикованих поверхонь, досягається номінальний розмір посадкового отвору, підвищується клас шорсткості поверхні втулки. У процесі розкочування пластично деформуються не тільки шорсткості оброблюваної поверхні, але й підшар металу, що їх несе. У зоні контакту з деформуючими роликами має місце пластично спрямований перебіг металу, що супроводжується згладжуванням внутрішньої поверхні й одночасним взаємним контактом мікрорельєфів зовнішньої поверхні втулки й отвору корпусу.

27 April 2026 in Podilian Bulletin Agriculture Engineering Economics
Verified
Journal Article
Open access
ПФП. П. Федірко
П. П. Федірко
ВДВ. І. Дуганець
В. І. Дуганець
ООО. А. Оленюк
О. А. Оленюк
ВБВ. С. Бончик
В. С. Бончик
На основі аналізу умов експлуатації та переважаючого характеру зносу широкої номенклатури деталей сільськогосподарської техніки запропоновано класифікацію зміцнюваних і відновлюваних електроіскровим методом об’єктів та описано методологічні та технологічні особливості обробки для збільшення їх зносостійкості та ресурсу. У статті розглянуто спосіб підвищення ресурсу (довговічності) робочих органів сільськогосподарських машин. Традиційно, робочі органи зношені до граничного розміру підлягають відновленню, а деталі з граничним зносом обробляються під найближчий ремонтний розмір. Недоліком такої технології є те, що при цьому допускається занадто великий діапазон між ремонтними розмірами, а це призводить до значного зниження ресурсу робочих органів. Авторами на основі аналізу умов експлуатації та переважаючого характеру зносу широкої номенклатури деталей сільськогосподарської техніки запропоновано класифікувати об’єкти, зміцнювані електроіскровим методом, та описати технологічні й методологічні особливості електроіскрової обробки для підвищення їхньої зносостійкості та ресурсу. Також проаналізовано сильні й слабкі сторони методу електроіскрового легування, перспективи розвитку та небезпеки, що супроводжують цю технологію. Виявлено шляхи збільшення товщини формованого покриття на зношених сталевих поверхнях деталей автомобілів. Експериментальними дослідженнями встановлено, що застосування електродів на основі карбіду вольфраму та карбіду титану з добавками компонентів, що утворюють з матеріалом поверхні необмежені тверді розчини та виконують роль флюсів, дозволяє формувати леговані покриття з максимальною товщиною.

1 January 2020 in Mehanization and electrification of agricultural
Verified
Journal Article
Closed access
VAV. A. Volsky V. A.
V. A. Volsky V. A.
VBV. S. Bonchik
V. S. Bonchik
Annotation Purpose. Development of a technique for determining the velocities of collision of the blades with the tuberous layer, the trajectory of movement, the magnitude and direction of the velocities of the most characteristic points. Methods. The research was carried out using the basic provisions of theoretical mechanics, statistics, probability theory, methods of differential calculations, mathematical modeling and applied programming. The studies were carried out on a specially designed laboratory installation using a vertical rotor hydraulic drive and strain gauge equipment mounted on a tractor, as well as a set of variable connecting plates for setting the machine operating modes. Results. The calculations of the absolute collision velocities of the blades of the lower and upper beaters of the vertical rotor at the start and end points, respectively, are performed. The geometric shape of the working surfaces and the direction of rotation for the extreme points of the outer contours of the blades of the lower and upper beaters of the vertical rotor of the potato harvester are substantiated. Conclusions. Using the above technique, as well as graphical dependences, we calculated the rational kinematic parameters of the blades of the lower and upper beaters of the vertical rotor, respectively, at the start and end points, where the greatest destruction of the tuber layer. For the lower beater blade, the absolute collision speed at the angle of rotation ωнt = 120° at the starting point = 1.6 m/s, at the end point – = 1.94 m/s. For the upper beater blade, the absolute collision speed at the angle of rotation ωвt = 120° at the starting point = 1.4 m/s, at the end point – = 1.92 m/s. Therefore, according to the specified rational kinematic parameters of the blades of the lower and upper beaters of the vertical rotor, it is possible to design the geometric shape of the surfaces of the crushing working bodies of potato harvesters. Keywords: blade, breaking surface, breasts, potatoes.