25 January 2019 in IEEE Photonics Technology Letters
Reducing the mode size mismatch between high-index-contrast silicon waveguide and single mode fiber takes an important role in photonic integration. A low-loss and broadband silicon nitride assisted edge coupler for coupling of light between silicon wire waveguides and high numerical aperture fiber is proposed and optimized for TE polarization. The mode size converter is composed of silicon inverse taper waveguides in core and two silicon nitride interlayers spaced by silica in cladding layers. The edge coupler is characterized with cleaved high numerical aperture fiber (mode field diameter is about 6.5 μm). With the help of refractive index matching oil (n = 1.46), the coupling loss for TE polarized light input is 0.35 dB at 1570 nm. The 1-dB bandwidth is 95 nm. The 1-dB alignment tolerances are higher than ± 2.5 μm and ± 1 μm in the horizontal and vertical directions, respectively, and higher than 25 μm in axial direction.
24 June 2022 in IEEE Photonics Technology Letters
Based on the Si-Si3N4 hybrid photonic platform, an integrated edge coupler embedded with both sub-wavelength grating (SWG) waveguide and suspended structure was demonstrated. The proposed device structure and geometrical parameters were fully optimized to realize efficient optical interconnections with standard single-mode fiber (SMF-28). The coupling loss of 0.86 dB/port for TE mode and 0.94 dB/port for TM mode was achieved with a remarkable polarization dependent loss (PDL) less than 0.1 dB at the input wavelength of 1600 nm. It revealed that the integrated edge coupler assisted by sub-wavelength grating can further reduce the PDL. Moreover, the device also exhibited the advantages of large alignment tolerance. The alignment tolerances for 1-dB excess loss are ±1.8 and ±2.5 μm in horizontal and vertical direction, respectively.
2 August 2021 in Journal of Materials Science: Materials in Electronics
The ridge waveguide integrated grating couplers (GCs) in lithium niobate on insulator (LiNbO3, LNOI) were designed, fabricated and characterized. Two ends of the tapered GCs were connected by the subwavelength gratings (SWG) waveguide of a sub-micrometric-diameter, the photonic-wire SWG structure was featured with the profile of side-walls corrugations, and the effect of geometrical dimensions on the output optical response was investigated. All the devices structure patterns for the integrated LNOI GCs could be simultaneously defined by one step of electron-beam lithography, and then easily fabricated by the optimized dry-etching processes, followed by samples surface cleaning. After the fabrication, a low coupling loss of − 5.1 dB/coupler at the telecommunication wavelength of 1561 nm was measured in the best thin-film LiNbO3 (TFLN) surface grating coupler for quasi-transverse-electric (quasi-TE) polarized signals, and a broad 3-dB optical bandwidth of wider than 95 nm was also obtained. The compact components exhibited magnificent performance, and might show the potential functionalities for the TFLN-based integrated optical waveguide devices.