The growth and properties of alloys in the alternative quaternary alloy system GaAs1−y−zPyBiz were explored. This materials system allows simultaneous and independent tuning of lattice constant and band gap energy, Eg, over a wide range for potential near- and mid-infrared optoelectronic applications by adjusting y and z in GaAs1−y−zPyBiz. Highly tensile-strained, pseudomorphic films of GaAs1−yPy with a lattice mismatch strain of ∼1.2% served as the host for the subsequent addition of Bi. Lattice-matched alloy materials to GaAs were generated by holding y∼3.3z in GaAs1−y−zPyBiz. Epitaxial films with both high Bi content, z ∼ 0.0854, and a smooth morphology were realized with measured band gap energies as low as 1.11–1.01 eV, lattice-matched to GaAs substrates. Density functional theory calculations are used to provide a predictive model for the band gap of GaAs1−y−zPyBiz lattice-matched to GaAs.
Laser diodes employing a strain-compensated GaAs1−xBix/GaAs1−yPy single quantum well (SQW) active region were grown by organometallic vapor phase epitaxy (OMVPE). High resolution x-ray diffraction, room temperature photoluminescence, and real-time optical reflectance measurements during the OMVPE growth were used to find the optimum process window for the growth of the active region material. Systematic post-growth in situ thermal anneals of various lengths were carried out in order to investigate the impacts of thermal annealing on the laser device performance characteristics. While the lowest threshold current density was achieved after the thermal annealing for 30 min at 630 °C, a gradual decrease in the external differential quantum efficiency was observed as the annealing time increases. It was observed that the temperature sensitivities of the threshold current density increase while those of lasing wavelength and slope efficiency remain nearly constant with increasing annealing time. Z-contrast scanning transmission electron microscopic) analysis revealed inhomogeneous Bi distribution within the QW active region.