Modern atomic clocks based on the interrogation of an atomic transitions in the optical regions require multiple lasers at different wavelength for producing atomic ions, trapping and laser cooling of neutral atoms or atomic ions. In order to achieve highest efficiency for laser cooling or any other atomic transition, frequencies of each of the lasers involved need to be stabilized by mitigating its drifts or fluctuations arise due to ambient temperature variation or other kind of perturbations. The present article describes simultaneous frequency stabilization of multiple number of lasers, required for production and laser cooling of ytterbium (171Yb) ions, to a reference transition frequency of rubidium (Rb) atoms. In this technique, a diode laser operating at ~ 780 nm is frequency stabilized to one of the Doppler broadening-free absorption peak of rubidium atoms (85Rb) and then used as a reference frequency for calibrating a wavelength meter and subsequent simultaneous frequency stabilization of four lasers operating at different wavelengths.
Sub-Doppler laser-cooled cesium-133 atoms are utilized as quantum sensors to achieve precise mapping of magnetic fields across a region in ultra-high vacuum (UHV), with a spatial resolution of 1 cm and a sensitivity of approximately 550 pT/√Hz, enabling accurate measurements within the nanotesla [nT] range. The cold cesium-133 atoms used for magnetic field measurements in this paper are a key component of the cesium fountain frequency standard at CSIR-NPL, which contributes to both timekeeping and magnetic sensing. The results show magnetic field fluctuations within 1 nT with a spatial resolution of 1 cm. The uncertainty in these measurements is of the order of 1.24 × 10−16, ensuring reliable and precise spatially resolved magnetic field mapping.
National time dissemination using terrestrial ethernet and optical fiber cables is an alternative to satellite-based systems and provides redundancy to reliable time services for critical infrastructure in the country. Precision time protocol based on IEEE 1588 standards using such cables and fibers can provide sub-microsecond time synchronization between a provider and the client. The method employs hardware time stamping, dedicated traffic-free fiber links, and PTP-aware network elements. We present a proof of concept experiment for the distribution of Indian standard time using the IEEE protocol in a laboratory and the effect of introducing a PTP-supported switch on the distribution performance. Further, we report on the observed synchronization when an underground dark telecom optical fiber lying outside the laboratory in the central Delhi region, is used as the medium of communication. The one-second pulse-pulse jitter is found to be within 2.5 ns.