To develop appropriate measures and means of fire protection at facilities, it is relevant to form an idea of the phenomenology of the processes of the occurrence, evolution, and termination of combustion. This paper proposes procedures for building mathematical models of the energy component of those physicochemical processes that occur in wood under the influence of fire, which make it possible to determine the time from the beginning of such an impact to the onset of the phase of flame combustion. The adequacy of mathematical modeling was tested experimentally at a standardized installation for studying flame propagation over the surface of wood. The samples used for the reported theoretical and experimental studies were the specimens of unprotected wood made from 20-mm-thick pine sapwood with a density of 400‒550 kg/m3. The samples of fireproof wood (of the same variety, thickness, and density) were impregnated with a fire retardant based on diammonium phosphate and ammonium sulfate (at consumption of 168.2 g/m2 of dry fire-retardant components). The modeling employed the results from the experimental determining of the ignition temperature of unprotected and fire-proof wood, specifically: 235 °C – for unprotected wood, 410 °C – for fire-proof wood, respectively. The results of mathematical modeling and experimental studies confirm the possibility of significant lengthening of time from the onset of fire exposure to the ignition of fire load from wood when nitrogen-phosphorus impregnating agents are used for fire protection. Procedures of mathematical modeling have been proposed to build models for determining the cooling effect from the use of impregnating fire retardants to protect the wood on the prolongation of the stage of a fire start. Mathematical modeling data could be applied when making impregnating fire retardants
1 January 2022 in Emergency Situations: Prevention and Liquidation
The purpose of this work is to study the influence of elevated heating temperatures (Т0, К)and external pressures (Р, Pa) on the speed and limits of combustion of compacted mixtures of aluminum powders and sodium nitrate with additives of organic substances for a wide range of changes in technological factors used in pyrotechnics production (coefficient of excess oxidizer , average particle size of metal combustible powder (dm, μm), relative mass content of organic substance additives and various external pressures (P, Pa), which determine the limiting, stable modes of combustion of mixtures, deviation from which leads to uncontrolled development process of their burning (a sharp increase in the rate of burning or its significant decrease up to the cessation of burning). The methodology for researching the influence of elevated heating temperatures on the speed and critical values of the combustion regimes of pyrotechnic mixtures based on aluminum and sodium nitrate powders with additives of organic substances for a wide change of technological factors (coefficient of excess oxidizer, average size of metal fuel particles, relative mass content of additives of organic substances) is presented. , which subsequently determines the stable combustion process of the mixture. Data on changes in the working ranges of technological parameters and external factors, in which the combustion process has a stable character, were obtained. The results of studies of the influence of elevated heating temperatures and external pressures on the rate of development of the combustion process of pyrotechnic mixtures for different values of technological parameters are presented. New maximum and minimum ranges of changes in the concentration limits of combustion of pyrotechnic mixtures based on aluminum and sodium nitrate with additives of organic substances affecting the combustion process have been established. Представлено методику дослідження впливу підвищених температур нагріву на швидкість та критичні значення режимів горіння піротехнічних сумішей на основі порошків алюмінію та нітрату натрію з добавками органічних речовин для широкої зміни технологічних факторів (коефіцієнту надлишку окиснювача, середнього розміру частинок металевого пального, відносного масового вмісту добавок органічних речовин), що в подальшому визначає стабільний процес горіння суміші. Отримано дані зміни робочих діапазонів технологічних параметрів та зовнішніх чинників, при яких процес горіння має стабільний характер. Наведені результати дослідження впливу підвищених температур нагріву та зовнішніх тисків на швидкість розвитку процесу горіння піротехнічних сумішей для різних значень технологічних параметрів. Встановлено нові максимальні і мінімальні діапазони зміни концентраційних меж горіння піротехнічних сумішей на основі алюмінію та нітрату натрію з добавками органічних речовин, що впливають на сам процес горіння.
25 May 2026 in Bulletin of Lviv State University of Life Safety