We report on the first demonstration of a diode-pumped, gas cooled, cryogenic multislab Yb:YAG amplifier. The performance was characterized over a temperature range from 88 to 175 K. A maximum small-signal single-pass longitudinal gain of 11.0 was measured at 88 K. When amplifying nanosecond pulses, recorded output energies were 10.1 J at 1 Hz in a four-pass extraction geometry and 6.4 J at 10 Hz in a three-pass setup, corresponding to optical to optical conversion efficiencies of 21% and 16%, respectively. To our knowledge, this represents the highest pulse energy so far obtained from a cryo-cooled Yb-laser and the highest efficiency from a multijoule diode pumped solid-state laser system.
The Diode Pumped Optical Laser for Experiments (DiPOLE) project at the Central Laser Facility aims to develop a scalable, efficient high pulse energy diode pumped laser amplifier system based on cryogenic gas cooled, multi-slab ceramic Yb:YAG technology. We present recent results obtained from a scaled down prototype laser system designed for operation at 10 Hz pulse repetition rate. At 140 K, the system generated 10.8 J of energy in a 10 ns pulse at 1029.5 nm when pumped by 48 J of diode energy at 940 nm, corresponding to an optical to optical conversion efficiency of 22.5%. To our knowledge, this represents the highest pulse energy obtained from a cryo cooled Yb laser to date and the highest efficiency achieved by a multi-Joule diode pumped solid state laser system. Additionally, we demonstrated shot-to-shot energy stability of 0.85% rms for the system operated at 7 J, 10 Hz during several runs lasting up to 6 hours, with more than 50 hours in total. We also demonstrated pulse shaping capability and report on beam, wavefront and focal spot quality.
We report on the successful demonstration of a 100 J-level, diode pumped solid state laser based on cryogenic gas cooled, multi-slab ceramic Yb:YAG amplifier technology. When operated at 175 K, the system delivered a pulse energy of 107 J at a 1 Hz repetition rate and 10 ns pulse duration, pumped by 506 J of diode energy at 940 nm, corresponding to an optical-to-optical efficiency of 21%. To the best of our knowledge, this represents the highest energy obtained from a nanosecond pulsed diode pumped solid state laser. This demonstration confirms the energy scalability of the diode pumped optical laser for experiments laser architecture.
We present a numerical model of a pulsed, diode-pumped Yb:YAG laser amplifier for the generation of high energy ns-pulses. This model is used to explore how optical-to-optical efficiency depends on factors such as pump duration, pump spectrum, pump intensity, doping concentration, and operating temperature. We put special emphasis on finding ways to achieve high efficiency within the practical limitations imposed by real-world laser systems, such as limited pump brightness and limited damage fluence. We show that a particularly advantageous way of improving efficiency within those constraints is operation at cryogenic temperature. Based on the numerical findings we present a concept for a scalable amplifier based on an end-pumped, cryogenic, gas-cooled multi-slab architecture.
In this paper we present details of a scalable design for a cryogenic helium gas cooled DPSSL amplifier based on a multislab Yb:YAG geometry. A prototype amplifier design capable of efficient amplification of 10 ns pulses to 10 J at 10 Hz is presented, which has been derived from computational fluid dynamic calculations and thermal modeling. Model predictions have also been used to design a suitable cryogenic gas cooling system, details of which are also presented. Experimental testing has confirmed stable amplifier temperatures are achievable from room temperature down to 88 K, with a gas coolant temperature stability of . Single-pass transmission wave front measurements are in reasonable agreement with model predictions derived from thermal maps for two different YAG slab geometries. Slabs with a narrower width Cr-doped YAG absorptive cladding, added to suppress ASE, demonstrated a wave front error of waves at 1030 nm (peak-to-valley) over the pumped region within the amplifier. The low level of optical distortion confirms that the amplifier design provides an acceptable level of temperature and flow uniformity and demonstrates the merit of a multislab geometry.
1 May 2014 in High Power Laser Science and Engineering
An overview of the Czech national R&D project HiLASE (High average power pulsed laser) is presented. The project focuses on the development of advanced high repetition rate, diode pumped solid state laser (DPSSL) systems with energies in the range from mJ to 100 J and repetition rates in the range from 10 Hz to 100 kHz. Some applications of these lasers in research and hi-tech industry are also presented.