31 January 2025 in International Journal of Clothing Science and Technology
Purpose: The goal of this research is to utilize 3D virtual fitting technology to design and develop a customized full leg sleeve with graduated compression and strategically placed adhesive stripes, aiming to improve training effectiveness by restricting bending movement in the leg.Design/methodology/approach: Knitted fabric and polymer adhesive film were chosen for compression garment development. The design of adhesive stripes was based on Kinesio taping method. Pattern design and 3D visualization was performed using Modaris 3D (CAD Lectra). The compression values were determined by the Laplace equation. The compression full leg sleeve with and without the adhesive stripes were fitted on the virtual mannequin in the squat position in order to determine the influence of adhesive stripes for tensile load in longitudinal direction.Findings: The compression values in a virtual garment varied from 23.17 ± 1.94 mmHg in the ankle girth to 13.41 ± 1.50 mmHg in the thigh girth. The difference did not exceed 3 mmHg compared to the planned pressure values. The obtained result showed that purposefully placed adhesive stripes significantly increased the tensile force in the longitudinal direction of the garment in a squat position, so it may improve training effectiveness.Research limitations/implications: 3D virtual fitting represents the fit on a solid body form, which may affect the accuracy of compression garment simulation, as the human body is not rigid.Originality/value: The application of 3D virtual fitting technology in creating customized and functional garments demonstrates its unique contribution to garment prototyping and product development.
1 December 2023 in Materials Science
The aim of this paper is to determine the influence of relative humidity on the comfort and electrical resistance properties of textile laminates in order to predict possible changes in footwear protection levels. Four textile laminates of different structure and fibre nature were selected for the study. It was determined that water vapour absorption of textile laminates strongly depends on the humidity of the storage environment. The absorption ability of laminates increases about 1.8 – 3 times as relative humidity increases from 65 % up to 95 %. The degree of increase depends on the textile laminate structure and the nature of the materials layers. The electrical properties of protective footwear can be influenced by the structure, thickness, relative humidity, and voltage of textile laminates. For textile laminates composed of natural and synthetic fibres and polymer foam as insulators, the resistivity increases with the thickness of the synthetic fibre and polymer layer. At low voltage (U = 100 V), the textile laminates tested became insulating materials, as the electrical resistivity exceeded the threshold values for antistatic materials in all relative humidity ranges. At high voltage (U = 500 V) the electrical resistivity of textile the laminates drops dramatically when the relative air humidity increases and the level of protection of the laminates depend on the amount of moisture absorbed and the nature of the layer materials. The laminates possessed insulating properties in environments of up to 65 % relative humidity. In a high humidity of the environment, the insulating properties of textile laminates turned to antistatic, except for laminate without a polymeric membrane, which became conductive.