Hydrogen peroxide (H 2 O 2 ) electrosynthesis via the 2e − oxygen reduction reaction (ORR) is considered as a cost‐effective and safe alternative to the energy‐intensive anthraquinone process. However, in more practical environments, namely, the use of neutral media and air‐fed cathode environments, slow ORR kinetics and insufficient oxygen supply pose significant challenges to efficient H 2 O 2 production at high current densities. In this work, mesoporous B‐doped carbons with novel curved B 4 C active sites, synthesized via a carbon dioxide (CO 2 ) reduction using a pore‐former agent, to simultaneously achieve excellent 2e − ORR activity and improved mass transfer properties are introduced. Through a combination of experimental analysis and theoretical calculations, it is confirmed that the curved B 4 C configuration, formed by mesopores in the carbon, demonstrates superior selectivity and activity for 2e − ORR due to its weaker interaction with *OOH intermediates compared to planar B 4 C in neutral media. Moreover, the mesopores facilitate oxygen supply and suppress the hydrogen evolution reaction, achieving a Faradaic efficiency of 86.2% at 150 mA cm −2 under air‐supplied conditions, along with an impressive O 2 utilization efficiency of 93.6%. This approach will provide a route to catalyst design for efficient H 2 O 2 electrosynthesis in a practical environment.
The development of efficient and durable bifunctional electrocatalysts is essential to simplify electrode design and fabrication in anion exchange membrane water electrolyzers (AEMWEs). However, most existing bifunctional catalysts suffer from poor stability and struggle to achieve high activity for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) simultaneously. Herein, we report Ir@Mn–Ni‐PA, phytic acid‐modified Mn‐doped Ni layered double hydroxide catalyst that incorporates atomically dispersed Ir sites through tailored design of single atoms. Synthesized via a simple hydrothermal method, the catalyst features hierarchical nanoarrays that enhance electron transport, mass diffusion, and hydrophilicity. Ir@Mn–Ni‐PA exhibits excellent bifunctional activity, delivering low overpotentials of 65 mV for HER and 272 mV for OER at 10 mA cm −2 , along with stability exceeding 100 h. When implemented in an AEMWE cell, it achieves a high current density of 1.64 A cm −2 at 2.0 V and remains stable for 300 h under industrially relevant conditions. Density functional theory calculations reveal that Ir atoms modulate the Mn–Ni‐PA electronic structure, narrowing the bandgap and enhancing charge transfer, which improves water adsorption, dissociation, and catalytic activity. These results highlight the potential of atomic‐level engineering for designing durable, high‐performance bifunctional catalysts for sustainable energy conversion.