This article proposes an improved deadbeat predictive controller for permanent-magnet synchronous motor drive systems. It can eliminate the influence of the parameter mismatch of inductance, resistance, and flux linkage. First, the performance of the conventional predictive current method is investigated to analyze sensitivities of the electric parameters. Then, a composite sliding-mode disturbance observer (SMDO) based on the stator current and lumped disturbance is proposed, which can simultaneously estimate the future current value and lumped disturbance caused by the parameter mismatch of inductance, resistance, and flux linkage. Based on the discrete-time SMDO, currents are estimated and used to replace the sampled values to compensate one-step delay caused by the calculation and sampling delay. Both simulation and experimental performances of the proposed method have been validated and compared with the conventional control methods under different conditions. The comparison results show the superiority of the proposed predictive current control method based on the composite SMDO.
30 June 2021 in IEEE Transactions on Transportation Electrification
This article represents modified model reference adaptive system (MRAS) method for speed sensorless control of interior permanent magnet synchronous motor (IPMSM), which can estimate rotor speed and position information. To suppress the adverse effect of parameter variation on control performance, the stator resistance and the permanent magnet flux linkage are estimated and continuously updated in reference and adjustable model. Then, proportional-integral (PI) controller parameters of speed adaptive law obtained by MRAS are optimized by gray wolf optimization (GWO) algorithm. To get the smallest possible speed following error and reference current error, the objective function is designed with discretized rotor speed error and current error as variables. The simulation results show the better performance of rotor speed estimation is obtained with GWO algorithm.
20 January 2021 in IEEE Transactions on Transportation Electrification
This article presents a composite sliding mode control (CSMC) method for speed control of surface-mounted permanent magnet synchronous motors (SPMSMs). The proposed CSMC consists of a new sliding mode control (SMC) based on a novel hybrid reaching law (HRL) and an extended sliding mode disturbance observer (ESMDO). The new HRL is composed of two parts: a terminal reaching part and an exponential plus proportional reaching part. It can effectively suppress the chattering and reduce the reaching time compared with the conventional constant plus proportional rate reaching law (CPRL). The ESMDO is designed based on CPRL. It can estimate the extra chattering produced by the drive system's lumped disturbance and compensate for the controller's output. Based on the proposed new SMC and ESMDO, an antidisturbance sliding mode speed controller is designed to improve the performance of SPMSM drive systems. The performance of the proposed method has been validated experimentally and compared with the CPRL-based SMC methods under different conditions.
22 October 2019 in IEEE Transactions on Industrial Electronics