17 October 2005 in IEEE Transactions on Plasma Science
This paper deals with the investigation of the fast electron beams that form in the high-current pseudospark discharge at different stages of its development. Three short-duration peak of the beam current at the discharge axis have been revealed. The physical reasons for the appearance of these peaks of the beam are discussed. The main idea of the proposed physical mechanism is that the electrons are accelerated in a double electric layer, which forms between the hollow cathode plasma and the near-anode plasma.
1 August 2019 in Journal of Physics Communications
The paper describes the investigations of a low-current discharge in airflow with the electrode configuration of coaxial plasmatron. An inner diameter of the plasmatron nozzle is of 0.5 cm and the mass airflow rate is from 0.1 to 0.3 g s−1. Typical averaged discharge current is varied from 0.06 to 0.2 A. In these conditions, due to airflow the so-called plasma jet forms in the plasmatron nozzle and at its exit. The total current in plasmatron mainly flows via the constricted plasma column of the glow discharge and only a small fraction of current is carried by the jet. The principal idea of the experiments is to reveal the mechanism of the jet formation and to elucidate how the nonsteady discharge regimes influence on the jet properties. We have proposed the method for the jet diagnostics, which is based on measuring the currents to the additional diagnostic electrodes located outside the nozzle. The obtained data show that the jet current forms due to electrons that are emitted from the boundary of plasma column. The temporal behavior of the jet current is determined by the position of the column inside the plasmatron nozzle, which changes with time. Hence, the term ‘plasma jet’ has to be used with care, since the charged particles in the jet area are the electrons. The estimated electron density in the jet is of about 109 cm–3.
1 July 2022 in Plasma Sources Science and Technology
The paper deals with investigations of the discharge in hydrogen in conditions close to those for the trigger units of pseudospark switches. The following modes of discharge sustaining are classified: the Townsend discharge, the suppressed glow discharge with hollow cathode, the intermediate mode of the gradual transition from the suppressed discharge to the ordinary glow discharge, and the ordinary discharge in which the negative glow plasma occupies the whole depth of the cathode cavity. As applied to the ordinary discharge, the theoretical model that offers a possibility to estimate the negative glow parameters is developed. In the current range 1.6–10 mA the electron densities in the negative glow region are 1.7–8.7 10 8 cm −3 . The interpretation for the mechanism of the current passage to the anode is also proposed based on the model. In particular, the explanation is given for the fact that the region of the positive column plasma near the flat anode appears at a low discharge current.
1 November 2025 in Journal of Radio Electronics
The present paper deals with the study of methods of triggering for the sealed-off pseudospark switch with a trigger unit based on an auxiliary glow discharge in conditions when the trigger pulse has a negative polarity. It is shown that the power supply scheme for auxiliary discharge sustainment and regimes of the discharge have a significant effect on the delay time of the switch triggering time relative to the instant of trigger pulse application and jitter. The causes of this effect are explained. The trigger schemes and auxiliary discharge power schemes, for which nanosecond stability of the switch operation is provided, have been revealed.