25 March 2022 in IEEE Transactions on Electron Devices
In this article, mechanisms of extremely low OFF-state current and abnormal negative bias stress (NBS) are systematically investigated by the varying process that contains various gas ratios and gas flows during In–Ga–Zn–O (IGZO) sputtering, and different annealing conditions. One model is proposed to indicate the level of ultralow leakage in IGZO thin-film transistor (TFT) dominated by the trap-limited conduction (TLC) along with different internal chemical states of the film, which is highly consistent with the results acquired by X-ray photoelectron spectroscopy (XPS) data. Some special leakage behaviors of devices with low oxygen-deficient defects or with high oxygen-related states are well matched the present model. Moreover, all devices show an abnormal positive threshold voltage shift ( $\Delta {V}_{\text {TH}}$ ) under NBS, which are also discussed using the similar mechanism. Following the proposed optimization strategy based on mechanism analysis, the IGZO TFT exhibits $ > 100\times $ reduction in leakage, $0.55\times $ decrease in subthreshold (SS), and $1.24\times $ increase in mobility compared with the pristine device, achieving an ultralow leakage of <10 −16 A/ $\mu \text{m}$ , promising mobility of 20.2 cm 2 /V·s, and good NBS stability with $\Delta {V}_{\text {TH}} < {0.38}$ V, simultaneously. Those results provide useful guidance to design IGZO-based high-density dynamic random access memory (DRAM) with long retention time, fast access time, and excellent stability under a low thermal budget.
8 July 2021 in IEEE Electron Device Letters
In this letter, sub-10-nm air channel devices were fabricated with the aid of photolithography and focused ion beam (FIB) etching. Field emission (FE) properties of the device were measured under ambient conditions. The operation mechanism was discussed by means of current-voltage (I-V) curve fitting and energy band diagram analysis. On account of the extremely shrinking of nano-gap, record-high emission currents of 355.6 μA at 1 V were realized in air with a threshold voltage as low as 0.588 V. A cycle test of 200 times was also performed to verify and analyze the stability of the device. Importantly, the temporal response performance of the device was also measured. It demonstrated a high-speed and repeatable output waveform with a rise/fall time of ~ 100 ns. This study demonstrates a practical nano-fabrication technology to fabricate sub-10-nm air channel devices with ultra-low operating voltage, which can be utilized as an electrical element in high-speed and low-power integrated circuits.
16 November 2023 in ACS Applied Nano Materials
26 April 2021 in IEEE Sensors Journal
The effects of total dose irradiation on graphene-based Hall sensors were investigated by 60 Co γ-ray in this paper. The basic electrical parameters of the sensors were measured before and after γ-ray irradiation up to 1 Mrad(Si). Decreases in the Hall voltage, linearity and current-related sensitivity in response to γ-ray irradiation were observed. With the help of Raman spectroscopy and X-ray photoelectron spectra (XPS), the degradation after irradiation was attributed to the introduction of defects and the increase in doping concentrations in the graphene layer. Moreover, the introduction of defects and impurities enhanced the Coulomb scattering of carriers, resulting in a decrease in mobility, which in turn affected the sheet resistance. This work provides an insight into the interactions of ionizing irradiation with graphene-based Hall sensors, which could be applied in space or other irradiation sensitive applications.
7 November 2022 in IEEE Sensors Journal
Nanoscale vacuum channel Hall sensors were fabricated and simulated. The fabrication flow was compatible with the complementary-metal-oxide-semiconductor (CMOS) process, and the active area was etched by using focused ion beam (FIB) technology. The current-voltage (I-V) characteristics of the bias terminals were measured to analyze the electron emission mechanism. Hall measurements were performed at ambient conditions to evaluate the Hall voltage, linearity, and voltage-related sensitivity of the proposed Hall sensor. The linearity error was less than 5%, and the voltage-related sensitivity was 0.28 V/VT. The performance of the sensor was similar to that of the common micron-sized Hall sensor, but with the benefits of small size and easy integration. Ultimately, a finite element method simulation was performed to show the potential distribution during normal sensor operation and to demonstrate the possibility of high frequency operation. This work clearly outlines the potential of nanoscale vacuum channel technology in Hall sensor applications.
26 April 2022 in Science China Information Sciences