In the emerging process-based transistors, random telegraph noise (RTN) has become a critical reliability problem. However, the conventional method to analyze RTN properties may not be suitable for the advanced silicon-on-insulator (SOI)-based transistors, such as the fully depleted SOI (FDSOI)-based transistors. In this paper, the mechanism of RTN in a 22-nm FDSOI-based metal–oxide–semiconductor field-effect transistor (MOSFET) is discussed, and an improved approach to analyzing the relationship between the RTN time constants, the trap energy, and the trap depth of the device at cryogenic temperatures is proposed. The cryogenic measurements of RTN in a 22-nm FDSOI-based MOSFET were carried out and analyzed using the improved approach. In this approach, the quantum mechanical effects and diffuse scattering of electrons at the oxide–silicon interface are considered, and the slope of the trap potential determined by the gate voltage relation is assumed to decrease proportionally with temperature as a result of the electron distribution inside the top silicon, per the technology computer-aided design (TCAD) simulations. The fitted results of the improved approach have good consistency with the measured curves at cryogenic temperatures from 10 K to 100 K. The fitted trap depth was 0.13 nm, and the decrease in the fitted correction coefficient of the electron distribution proportionally with temperature is consistent with the aforementioned assumption.
Nanoscale vacuum channel Hall sensors were fabricated and simulated. The fabrication flow was compatible with the complementary-metal-oxide-semiconductor (CMOS) process, and the active area was etched by using focused ion beam (FIB) technology. The current-voltage (I-V) characteristics of the bias terminals were measured to analyze the electron emission mechanism. Hall measurements were performed at ambient conditions to evaluate the Hall voltage, linearity, and voltage-related sensitivity of the proposed Hall sensor. The linearity error was less than 5%, and the voltage-related sensitivity was 0.28 V/VT. The performance of the sensor was similar to that of the common micron-sized Hall sensor, but with the benefits of small size and easy integration. Ultimately, a finite element method simulation was performed to show the potential distribution during normal sensor operation and to demonstrate the possibility of high frequency operation. This work clearly outlines the potential of nanoscale vacuum channel technology in Hall sensor applications.
30 July 2021 in Semiconductor Science and Technology
In this paper, a radiation-hardened resistive random-access memory (RRAM)-based non-volatile (NV) latch with a dual-interlocked storage cell is proposed and analyzed. The single-event effects of the proposed NV latch are simulated and discussed. Simulations of the proposed element are based on a 0.18 μ m complementary metal-oxide-semiconductor design kit for the peripheral circuit and the voltage threshold adaptive memristor model for the RRAM. The simulation results indicate that the injected charge to induce a single-event upset (SEU) of the proposed NV latch is above 4.5 pC. As compared to the traditional RRAM based NV latch, the proposed NV latch is relatively immune to an SEU. This immunity from the SEU originates from the redundant storage nodes and interlocked feedback mechanism. Moreover, the area overhead of the proposed NV latch (eight transistors in the core storage element) are much lower than other radiation-hardened technology, e.g. TMR or FERST.
24 January 2022 in Semiconductor Science and Technology
In this paper, we carried out detailed technology computer aided design simulations to investigate the radiation effects, e.g. total ionizing dose (TID) and single-event effects (SEEs), on direct current (DC) and radio frequency (RF) characteristics of the gate-all-around (GAA) nanosheet field-effect transistor (FET). The simulation model used is composed of seven-layer stacked GAA nanosheet FET with Lg = 22 nm, which was implemented in this study. The open current and the drain-induced barrier lowering of the device are ∼3 mA μm−1 and 47 mV V−1, respectively. The results indicate that the TID have little influence on the DC and RF characteristics when the transistor is working in an open state. During the SEEs simulation, we considered three incident directions for the high energy particle, including the lateral direction of the channels, the vertical direction of the channels and the top of the channels. The influence of the particle injecting along the lateral and vertical directions of the channels shows stronger relation with the distance from the incident point compared to the influence of the particle from the top. Besides, the general influence of the particle injecting along the lateral directions of the channels is higher than the other two directions. The total injected charge of the particle injecting along the lateral direction, along the vertical direction and from the top are 3 fC, 1.4 fC and 2.1 fC, respectively. As compared to the fin FET, the GAA nanosheet has superior RF performances and less sensitivity to TID effect. This work can provide a guideline for the GAA nanosheet devices in aerospace and avionic RF applications.
1 November 2024 in IEEE Transactions on Device and Materials Reliability
As the scaling down of the silicon (Si) -based transistors is reaching its physical limits, the vertical-structure complementary metal-oxide-semiconductor (VCMOS) process has emerged as a promising technology due its comparative advantages, in terms of aggressive scalability. Along these lines, in this work, an emerging nano-scale vertical back-gate (VBG) CMOS platform with gate length depending on the deposition process instead of the accuracy of the lithography process was proposed. In addition, the total ionizing dose (TID) effects on both the direct current and radio frequency characteristics of the proposed VBG MOSFETs were investigated by performing technology computer aided design (TCAD) simulations. Besides, a high integration-density inverter was implemented by the VBG CMOS platform as well. Both the DC and transient performances of the proposed inverter under TID effects were also characterized. From the simulated results it was demonstrated that although the VBG CMOS platform has the potential to be applied in digital integrated circuits (ICs) and RF ICs, the sensitivity to TID is still a problem to be mitigated. This work provides valuable guidelines for the TID-hardened design of VBG MOSFETs and circuits.
This work investigates the effects of total ionizing dose (TID) on 22 nm FDSOI MOSFET devices through combined technology computer-aided design (TCAD) simulations and actual TID irradiation experiments, establishing a comprehensive dataset of radiation-induced degradation characteristics. By utilizing both simulated and experimental radiation data as training foundations, this research developed and optimized a deep neural network (DNN) capable of conducting efficient and accurate reliability analysis of TID effects under various radiation conditions, with demonstrated effectiveness in predicting device performance degradation across different TID ranges. The methodology integrates physical simulations with deep learning approaches, where TCAD simulations and irradiation experiments capture fundamental device physics under radiation exposure, while the DNN enables rapid performance prediction. The resulting framework achieves superior prediction accuracy while significantly reducing computational costs compared to conventional simulation methods, providing a powerful solution for evaluating electronic device reliability in complex radiation environments.