1 January 2016 in Procedia Engineering
The research results of the material, chemical and mineral compositions of waste coal from the processing plant Abashevskaya and carbonaceous argillites from the Korkino coal mine are provided. The technology of waste coal recycling is offered that can be used in the production of coal fuel for bricks burning and preparation of the raw material for ceramics manufacture. On the basis of the pilot plant tests it is shown that the pneumatic waste classification allows coal residues to be extracted from argillites and a stable ceramic raw material to be obtained for the brick manufacture. Such complex processing of waste coal does not only provide a significant expansion of the raw material base for the production of building materials and generation of additional energy, but will also help to solve environmental problems and improve the environmental situation in industrial regions. Due to the introduction of the patented method of production and rational compositions of the granulated molding materials there is an increase in operational properties of ceramic wall materials produced from the waste coal after secondary processing. The study of thin sections using a polarizing microscope and SEM was conducted to examine the structures of the obtained ceramic cork. It was established that high physical and mechanical properties of the brick were achieved by forming the matrix structure of a ceramic crock, intensive generation of the glass phase at the interphase boundary of the composite material and the temperature reduction of processes of a solid-phase sintering during burning
20 April 2016 in IOP Conference Series: Materials Science and Engineering
The study of the matrix structure of ceramic brick made from carbonaceous mudstone tailings of Korkinsky coal opened pit mine is presented in the current paper. This study includes a thin sections analysis by the polarizing microscope, X-ray, SEM and infrared spectra investigations. It has been discovered that processes of solid- and liquid-phase sintering with the formation of new mineral phases occur inside and on the surfaces of granules during firing. It is shown that a liquid phase is formed in the matrix. It fills inter-grain gaps and connects mineral particles between themselves. It has been found that the advanced physical and mechanical properties of ceramic bricks obtained by creation of the matrix ceramic crock structure, intensive forming of a glass phase on the boundary of the section medium of ceramic composite and temperature reduction of the processes of solid-phase sintering.
1 April 2015 in Applied Mechanics and Materials
The present study provides chemical, granulometric and mineral compounds of raw materials of ceramic charge. The ceramic materials structure made of slimy part of iron ore wastes with corrective additions has been observed by the SEM, petrographic methods and spectral analysis. The introduction of corrective additions leads to formation of crock with evident glass ceramic structure describable by porous texture. Pore space is completely or partially filled with cryptocrystalline substance. It has been determined vanadium component intensifies sintering processes during the firing and leads to formation of new mineral phases. This increases the strength of ceramics.
1 January 2023 in Construction Materials
1 December 2013 in Advanced Materials Research
The article gives the results of scanning electron microscopy (SEM) studies of the structure of ceramic matrix composite materials produced from iron ore waste. It is established that inside the matrix and the granules during the firing the processes of solid-phase and liquid-phase sintering with formation of new mineral phases take place. It is shown that in the matrix a liquid phase is formed, which fills intergranular cells and binds the particles of minerals together.
1 January 2022 in Construction Materials