The research results of the material, chemical and mineral compositions of waste coal from the processing plant Abashevskaya and carbonaceous argillites from the Korkino coal mine are provided. The technology of waste coal recycling is offered that can be used in the production of coal fuel for bricks burning and preparation of the raw material for ceramics manufacture. On the basis of the pilot plant tests it is shown that the pneumatic waste classification allows coal residues to be extracted from argillites and a stable ceramic raw material to be obtained for the brick manufacture. Such complex processing of waste coal does not only provide a significant expansion of the raw material base for the production of building materials and generation of additional energy, but will also help to solve environmental problems and improve the environmental situation in industrial regions. Due to the introduction of the patented method of production and rational compositions of the granulated molding materials there is an increase in operational properties of ceramic wall materials produced from the waste coal after secondary processing. The study of thin sections using a polarizing microscope and SEM was conducted to examine the structures of the obtained ceramic cork. It was established that high physical and mechanical properties of the brick were achieved by forming the matrix structure of a ceramic crock, intensive generation of the glass phase at the interphase boundary of the composite material and the temperature reduction of processes of a solid-phase sintering during burning
This article presents a model of a novel 4-DOF kinematically redundant planar parallel grasping manipulator. As distinct from the traditional 4-DOF manipulator, the proposed design includes an extensible platform, which provides kinematic redundancy. This constructive feature is used for grasping. The article discusses the inverse and forward kinematics of the proposed manipulator. The inverse kinematics algorithm provides the analytical relations between the platform coordinates and the driven (controlled) coordinates. The forward kinematics algorithm allows defining different assembly modes of the manipulator. Both algorithms are demonstrated using numerical examples. The article discusses different designs of the manipulator in which its links are placed in one, two, or three layers. Based on these designs, we performed their workspace analyses.
This article introduces a novel modification of a Delta-type parallel robot. The robot has five degrees of freedom and provides its end-effector with a 3T2R motion pattern (three translational and two rotational degrees of freedom). The fifth degree of freedom (rotation) is kinematically decoupled from the other four motions, and it is controlled by two drives. Thus, the proposed robot has a redundant actuation. In this article, we present an algorithm to solve the inverse kinematics of this robot and apply it to a path modeling example of a spiral-like trajectory. Numerical simulations illustrate the algorithm and show how the actuated coordinates change along the considered trajectory. Forward kinematics follows next, and an approach is introduced to determine all end-effector configurations for the specified displacements in the actuated joints. A numerical example presents four assembly modes of the robot corresponding to four real solutions of the forward kinematic problem. Finally, this article demonstrates a computer-aided design and analysis of the proposed robot: we describe a procedure for analyzing inverse kinematics and calculating actuation torques. This study forms the basis for the future manufacturing and experimental analysis of a robot prototype.
20 April 2016 in IOP Conference Series: Materials Science and Engineering
The study of the matrix structure of ceramic brick made from carbonaceous mudstone tailings of Korkinsky coal opened pit mine is presented in the current paper. This study includes a thin sections analysis by the polarizing microscope, X-ray, SEM and infrared spectra investigations. It has been discovered that processes of solid- and liquid-phase sintering with the formation of new mineral phases occur inside and on the surfaces of granules during firing. It is shown that a liquid phase is formed in the matrix. It fills inter-grain gaps and connects mineral particles between themselves. It has been found that the advanced physical and mechanical properties of ceramic bricks obtained by creation of the matrix ceramic crock structure, intensive forming of a glass phase on the boundary of the section medium of ceramic composite and temperature reduction of the processes of solid-phase sintering.
4 October 2016 in IOP Conference Series: Earth and Environmental Science
The results of the study on phase transformations and structure formation during firing of bricks made from wastes of coaly argillite processing. The effect of firing temperature on the processes of mineral formation and changes in the quantitative content of amorphous phase and brick porosity was defined. It was found that at 950-1050 °C the sintering takes place providing a solid brick structure.