Este estudo teve por objetivo a caracterização energética do carvão de resíduos de cinco espécies provenientes de marcenarias no município de Gurupi, TO, bem como avaliar a influência do tempo e temperatura final de carbonização. Dos resíduos de cada uma das cinco espécies, foram obtidos vinte corpos de prova. O carvão vegetal foi obtido por meio da pirólise da madeira em forno tipo mufla, onde foram utilizadas duas marchas com temperaturas finais de carbonização de 450 °C e 500 °C e tempo de carbonização de 6 h e 7 h, respectivamente. Para a determinação da densidade aparente e do rendimento gravimétrico, os carvões foram pesados em balança analítica e medidos com paquímetro. A análise química imediata (AQI) foi realizada em forno mufla, para a determinação dos materiais voláteis, carbono fixo e cinzas, sendo também calculado o poder calorífico. O rendimento gravimétrico apresentou valores médios aceitáveis para todas as espécies e temperaturas (36,4%). Os teores de materiais voláteis (27,7%), carbono fixo (70,6%) e cinzas (1,7%) também foram considerados aceitáveis. O poder calorífico apresentou valores dentro dos padrões recomendados, apresentando alto potencial energético. A temperatura final de carbonização recomendada foi de 500 °C.
This study aimed to determine the resistance of Eucalyptus wood clones after exposure to the soil in a decay field. Samples taken from the heartwood of 3 Eucalyptus camaldulensis x Eucalyptus grandis hybrid trees were used for the pyroligneous liquor, chromated copper borat, and untreated treatments, where physical, chemical, and mechanical tests were used for evaluation. Chemical and mechanical analysis demonstrated that there was interaction between factors and significant differences between and within treatments. Wood treated with pyroligneous liquor showed lower solubility in cold water when compared to CCB and, therefore, lower leaching. Both treatments were statistically equal in terms of MOR resistance and mass loss. It was concluded that treating Eucalyptus wood with pyroligneous acid, compared to treatment with CCB and untreated wood, was equally efficient mainly for the property of resistance to static bending, showing potential as a preservative product.
18 July 2024 in Journal of the Indian Academy of Wood Science
The objective of this study was to evaluate the behavior of Eucalyptus spp. wood stored outdoors over a period of four months, focusing on the energy quality of the wood and charcoal. During the four months, samples were collected each month to analyze the wood and charcoal. The analyses included the assessment of the physical, chemical, and energetic properties of the wood, as well as the properties of the charcoal. During storage, the wood exhibited mass losses (0.22 to 1.39%) and basic density (0.75 to 0.64 g/cm³) in all treatment months; however, until the third month, there was an increase in total lignin content due to losses in holocellulose. Despite the losses in mass and holocellulose, there was an increase in energy for the wood. For the charcoal, there was an increase in fixed carbon and calorific value until the third month. It is concluded that until the third month of treatment, the wood showed positive performance for energy generation. In contrast, in the fourth month, it exhibited lower basic and apparent density, carbon stock, and energy density, resulting in decreased energy potential. The recommendation from this study is that Eucalyptus spp. wood demonstrated good resistance to outdoor storage with good quality for up to three months; beyond that, it began to show significant losses.