1 January 2018 in Advances in Materials Science and Engineering
IAIsabella Imakawa De Araujo
Isabella Imakawa De Araujo
MAMilena Maria Van Der Neut De Almeida
Milena Maria Van Der Neut De Almeida
FLFrancisco Antonio Rocco Lahr
Francisco Antonio Rocco Lahr
This study aimed to evaluate the feasibility of using and influence of alternative wood species such as Cambará, Paricá, Pinus, and wood from first thinning operations on oriented strand board (OSB) physical and mechanical properties. Besides that, an alternative resin, castor oil‐based polyurethane, was used to bond the particles, due to the better environmental performance when compared to other resins commonly used worldwide in OSB production. Physical properties such as the moisture content, thickness swelling, and water absorption, both after 2 and 24 hours of water immersion, and mechanical properties such as the modulus of elasticity and resistance in static bending, in major and minor axes, and internal bonding were investigated. All tests were performed according to European code EN 300:2006. Results showed the influence of wood species on physical and mechanical properties. Panels made with higher density woods such as Cambará presented better physical performance, while those made with lower density woods such as Pinus presented better mechanical properties. Besides that, strand particle geometry was also influenced on all physical and mechanical properties investigated. Therefore, the feasibility of using alternative species and wood from first thinning and with castor oil‐based polyurethane resin in OSB production was verified.
1 September 2019 in Ambiente Construído
Resumo Os painéis reconstituídos à base de madeira são uma alternativa para utilização na construção civil e na indústria do mobiliário. Dentre os tipos de painéis, destacam-se o OSB (Oriented Strand Board) e o MDP (Medium Density Particleboard). O objetivo desta pesquisa foi avaliar as propriedades físicas e mecânicas de painéis híbridos OSB/MDP, visando uma alternativa de uso em novo sistema fabril com o reaproveitamento de partículas de madeira. Foram fabricados painéis OSB, híbridos e MDP em escala laboratorial e determinadas suas respectivas propriedades físicas e mecânicas de acordo com as normas EN 300:2006 e ABNT NBR 14.810-2:2013. A influência dos tipos de painéis nas propriedades foi investigada pela análise de variância (ANOVA), os testes de normalidade de Anderson-Darling (AD) e de homogeneidade de variâncias de Bartlett (Bt) foram utilizados na verificação da validade das hipóteses da ANOVA. O teste de comparações múltiplas de Tukey foi utilizado para o agrupamento dos níveis do fator (tipo de painel) nas propriedades avaliadas. Os valores obtidos para as propriedades físicas e mecânicas dos painéis híbridos OSB/MDP alcançaram os valores mínimos determinados pelas normas vigentes. Os painéis híbridos apresentaram propriedades que permitem sua aplicação estrutural e em ambientes úmidos.
10 May 2019 in Pesquisa Florestal Brasileira
Este trabalho teve por objetivo avaliar as propriedades físicas e mecânicas de painéis aglomerados produzidos com madeira de Ligustrum lucidum W.T. Aiton, pura ou com Pinus taeda, e comparar as propriedades desses painéis com os requisitos normativos e com os produzidos somente com Pinus taeda. Os painéis foram produzidos com adesivos uréia-formaldeído e tanino-formaldeído na proporção de 10% de massa de sólido sobre a massa seca de partículas. Para a confecção dos painéis, foi estabelecida massa específica nominal de 0,75 g cm-³, pressão específica de 3,92 MPa, temperatura de 160 °C e tempo de prensagem de 8 min para o adesivo uréia-formaldeído e 10 min para tanino-formaldeído. Após o período de climatização dos painéis, foram confeccionados os corpos de prova destinados aos ensaios físicos e mecânicos. Verificou-se que apenas madeira de Ligustrum lucidum com adesivo tanino-formaldeído, bem como a combinação de madeiras e adesivo uréia-formaldeído, proporcionou aos painéis melhores propriedades físicas e mecânicas. Esses tipos de painéis atenderam aos requisitos normativos de propriedades mecânicas e demonstraram que L. lucidum tem potencial para uso na produção de painéis aglomerados.
1 January 2021 in Floresta e Ambiente
1 June 2020 in Ambiente Construído
Glulam are long engineered wood beams (or columns) composed by graded lumbers bounded together with the use of appropriate adhesives under pre-established pressure. The greater the industrialization the greater will be the production of wood waste a matter that deserves attention and development of technologies in terms of its waste management. This paper aimed to investigate the technical feasibility of Brazilian industrial glulam waste usage as raw material for particleboard production industries using a castor oil-based polyurethane adhesive. Particleboards were manufactured using glulam (produced with Eucalyptus urograndis) waste particles and castor oil-based polyurethane adhesive at 8, 10, 12 and 14% mass proportions and characterized based on NBR 14810-2:2006 procedures. Analysis of variance was performed for the comparison of mechanical and physical performances of the panels. The increase of adhesive content caused and increase of the MOR (Rupture Modulus), but the MOE (Elasticity Modulus) and the physical properties remained unaltered above 12% of adhesive content. The adhesive content greater than 8% provided panel performances that met the standardized specifications. Based on these findings, it was possible to conclude that the waste of glulam produced with Eucalyptus urograndis can be used as raw material for particleboard production.
1 January 2020 in Matéria (Rio de Janeiro)
Brazil presents many wood species that are very useful in several sectors such as civil construction and furniture industry. Rational use of wood resources depends on the wood characterizations process, that can become easier using equations involving properties of interest. Some theoretical equations found in the literature were developed for primarily softwood from the northern hemisphere, but not checked regarding of their accuracy for tropical Brazilian wood species. This paper aims to confront four theoretical equations with the dimensional stability quantities of fifteen tropical Brazilian woods and test the accuracy of them for these wood species. Results showed that experimental values present greater variability than the ones provided by the theoretical equations. Kruskal-Wallis ANOVA performed showed that one of the four equations cannot be accurately used for tropical Brazilian wood species at 5% significance level.