The interconnected systems (ISs) are commonly exposed to electromagnetic environments with different maximum field levels, and the measurement technique on how to perform radiated susceptibility (RS) test is one of the most attractive research topics of the electromagnetic compatibility (EMC) community. In this work, the dual reverberation chamber (DRC) is used to reveal the potential EMC issues of the IS, which also provides a comparison with the RS tests performed in a conventional RC. By using a typical IS on the ship, we highlight the evidence supporting IS to conduct the RS tests in the DRC. Taken together, the results show that the IS will be more sensitive within the DRC and expose more acute EMC problems on one hand; on the other hand, the IS also presents a larger probability of sensitivity.
To achieve the transfer impedance measurement of electromagnetic interference (EMI) gaskets, a fixture useful up to 18 GHz is developed based on the SAE ARP1705C standard. The radial size of the coaxial section of the fixture is shaped from the perspective of its characteristic impedance and suppression of higher-order modes. Subsequently, a parametric analysis is performed to examine the sensitivity of critical dimensions, and the study analyzes the key factors affecting the voltage standing wave ratio (VSWR) of the fixture and its 50 $\Omega$ resistor. Based on the preceding analysis, two solutions are proposed to improve the VSWR: reducing the length of the 50 $\Omega$ resistor and modifying the shape of the coaxial outer conductor. The ultimate outcome of the transfer impedance measurement fixture yields a VSWR lower than 2.6:1, up to 18 GHz. The functionality of the fixture is demonstrated through the measurement of two gaskets, showcasing its practical utility in engineering applications.
6 November 2023 in IEEE Transactions on Electromagnetic Compatibility
This article analyzes the characteristic impedance and peak E-field distribution in time domain of the cross section in wired structural bounded wave simulator (BWS) based on method of moments (MoM). First, the static field assumption has been taken into account in electromagnetic modeling. Second, the charge distribution is solved based on MoM. Third, the characteristic impedance and the peak E-field distribution are derived from previous analysis. Measurements of the developed BWS indicates that analysis of characteristic impedance and peak E-field in this article agrees with the test results to some extent. Related research can provide some guidance in the design of BWS and the radiated susceptibility test.
7 November 2024 in IEEE Transactions on Antennas and Propagation
This paper analyzes the E-field response in the test volume of bounded wave simulator (BWS) in time domain (TD) based on non-uniform multi-conductor transmission lines (NMTL) and electric dipole theory. First, the transmission lines (TL) in BWS are modeled as a NMTL system and divided into a certain number of cascaded uniform multi-conductor transmission lines (MTL). Second, the current distribution in frequency domain (FD) along the TLs of BWS is determined based on the theory of MTL and the chain parameter matrix (CPM) when sinusoidal continuous wave signals of different frequencies are fed into BWS. Third, the E-field at field point of the test area of BWS is calculated by summing the E-field radiated by all the currents on the TLs in BWS via the electric dipole theory. Finally, the E-field response in TD is solved via discrete Fourier transform (DFT) and inverse discrete Fourier transform (IDFT). The validity of the proposed algorithm is investigated by analyzing an example of BWS, which is measured experimentally. It has been shown from the established results that the proposed method leads to an effective technique for analyzing the E-field response in the test volume of BWS. Related research in this paper can provide some guidance in the analysis of BWS and transient electromagnetic field radiation sensitivity test (RS 105).
29 February 2024 in IEEE Transactions on Electromagnetic Compatibility
This article proposes a numerical algorithm for the evaluation of the characteristic impedance of transverse electromagnetic (TEM) and asymmetrical TEM (ATEM) cells based on the method of moment and static field approximation. The correctness of the calculation result is verified by testing for developed TEM and ATEM cells within an acceptable margin of error.