This paper analyzes the E-field response in the test volume of bounded wave simulator (BWS) in time domain (TD) based on non-uniform multi-conductor transmission lines (NMTL) and electric dipole theory. First, the transmission lines (TL) in BWS are modeled as a NMTL system and divided into a certain number of cascaded uniform multi-conductor transmission lines (MTL). Second, the current distribution in frequency domain (FD) along the TLs of BWS is determined based on the theory of MTL and the chain parameter matrix (CPM) when sinusoidal continuous wave signals of different frequencies are fed into BWS. Third, the E-field at field point of the test area of BWS is calculated by summing the E-field radiated by all the currents on the TLs in BWS via the electric dipole theory. Finally, the E-field response in TD is solved via discrete Fourier transform (DFT) and inverse discrete Fourier transform (IDFT). The validity of the proposed algorithm is investigated by analyzing an example of BWS, which is measured experimentally. It has been shown from the established results that the proposed method leads to an effective technique for analyzing the E-field response in the test volume of BWS. Related research in this paper can provide some guidance in the analysis of BWS and transient electromagnetic field radiation sensitivity test (RS 105).
1 April 2026 in IEEE Antennas and Wireless Propagation Letters
This letter proposes a novel method for measuring antenna efficiency in a reverberation chamber based on antenna equivalent circuit theory. By measuring the absorption cross sections of the antenna under matched and open-circuit load conditions, a theoretical relationship between the antenna efficiency and the equivalent circuit parameters is established, from which the efficiency of the antenna under test is determined. Compared to the existing methods for antenna efficiency measurement in a reverberation chamber, the proposed method eliminates the need for a reference antenna with known efficiency and the determination of the time constant of the reverberation chamber. Consequently, the proposed method significantly reduces both the hardware requirements and the data processing complexity.
1 September 2026 in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields