26 March 2019 in Communications Physics
Magnetic resonance imaging (MRI) represents a mainstay among the diagnostic imaging tools in modern healthcare. Signal-to-noise ratio (SNR) represents a fundamental performance metric of MRI, the improvement of which may be translated into increased image resolution or decreased scan time. Recently, efforts towards the application of metamaterials in MRI have reported improvements in SNR through their capacity to interact with electromagnetic radiation. While promising, the reported applications of metamaterials to MRI remain impractical and fail to realize the full potential of these unique materials. Here, we report the development of a magnetic metamaterial enabling a marked boost in radio frequency field strength, ultimately yielding a dramatic increase in the SNR (~ 4.2×) of MRI. The application of the reported magnetic metamaterials in MRI has the potential for rapid clinical translation, offering marked enhancements in SNR, image resolution, and scan efficiency, thereby leading to an evolution of this diagnostic tool.
28 January 2019 in Microsystems & Nanoengineering
Electromagnetic metamaterials, which are a major type of artificially engineered materials, have boosted the development of optical and photonic devices due to their unprecedented and controllable effective properties, including electric permittivity and magnetic permeability. Metamaterials consist of arrays of subwavelength unit cells, which are also known as meta-atoms. Importantly, the effective properties of metamaterials are mainly determined by the geometry of the constituting subwavelength unit cells rather than their chemical composition, enabling versatile designs of their electromagnetic properties. Recent research has mainly focused on reconfigurable, tunable, and nonlinear metamaterials towards the development of metamaterial devices, namely, metadevices, via integrating actuation mechanisms and quantum materials with meta-atoms. Microelectromechanical systems (MEMS), or microsystems, provide powerful platforms for the manipulation of the effective properties of metamaterials and the integration of abundant functions with metamaterials. In this review, we will introduce the fundamentals of metamaterials, approaches to integrate MEMS with metamaterials, functional metadevices from the synergy, and outlooks for metamaterial-enabled photonic devices.
1 March 2019 in Sensors and Actuators A: Physical
6 August 2018 in Applied Physics Letters
We present a comprehensive investigation of a continuously tunable metamaterial perfect absorber operating at terahertz frequencies. In particular, we investigate a three-layer absorber structure consisting of a layer of split ring resonators and a metallic ground plane, with a central layer consisting of a mechanically tunable air-spaced layer. The absorber was characterized using terahertz time-domain spectroscopy in reflection (at normal incidence) as a function of spacer thickness from 0 to 1000 μm. Our experimental measurements reveal the detailed evolution of the absorption bands as a function of spacing, in excellent agreement with analysis using interference theory and simulation. Our Fabry-Pérot-like structure provides an avenue for achieving massive tunability in metamaterial absorber devices.
1 September 2018 in Sensors and Actuators A: Physical
18 January 2019 in Optics Express
A typical metamaterial perfect absorber (MPA) is comprised of a metamaterial layer, a dielectric spacer, and a ground plane. The conventional spacer material is usually a lossy dielectric with little-dispersion for the purpose of easing the design and optimization procedure of the MPA. In this paper, we present the design, fabrication, and characterization of metamaterial perfect absorbers with a highly dispersive spacer, which is compatible with functional microelectromechanical systems. The measured dispersive permittivity of a silicon nitride thin film is used in modeling the absorption response of MPAs with rigorous coupled wave analysis. Different designs of MPA structures are fabricated and characterized. Spectroscopy data shows two perfect absorption peaks in wavelengths ranging from 8 μm to 20 μm, which supports the theoretical calculation and numerical simulation. The dispersion of silicon nitride enables the shared resonant modes of the two peak wavelengths and decreases the wavelength shift led by variations in structural parameters. We demonstrate that the use of dispersive dielectric materials in MPAs potentiates various functional devices.