This study evaluated the performance of geopolymer concretes based on a binary mixture of fly ash (FA) with blast furnace slag (GBFS) in an 80/20 ratio and activated with a mixture of sodium silicate and sodium hydroxide. FA/GBFS and portland cement (OPC) concretes were immersed in 5% by weight sodium sulfate and magnesium sulfate solutions. Volumetric expansion and mechanical resistance loss were measured, and the reaction products were characterized by X-ray diffraction and scanning electron microscopy. The highest levels of deterioration were found in the probes exposed to MgSO4, indicating the higher aggressiveness of this solution. After aging for 360 days in MgSO4, the FA/GBFS concrete expanded by 0.04% and decreased its mechanical resistance by 33%, compared to 0.08 and 48%, respectively, for similarly treated OPC concretes. However, the same exposure to Na2SO4 increased the observed FA/GBFS resistance while reducing the mechanical resistance of OPC by 30%. This relates to their respective ...
1 August 2018 in Construction and Building Materials
The aim of this research was to study the carbonation resistance of a blast furnace slag concrete (80% GBFS/20%OPC), with and without alkaline activation, and its influence on the corrosion of structural reinforcement. An OPC-based concrete produced under the same specifications was used as a reference material. To do this, the material was subjected to an accelerated carbonation process under controlled conditions (65% relative humidity, 1% CO2, 25°C). The half-cell potential (Ecorr), linear polarization resistance (LPR) tests showed that both concretes based on GBFS led to depassivation of the reinforcing steel at approximately 99 days, which is the time required for full carbonation of the evaluated concretes.
Concretes based on alkaliactivated binders have attracted considerable attention as new alternative construction materials, which can substitute Portland Cement (OPC) in several applications. These binders are obtained through the chemical reaction between an alkaline activator and reactive aluminosilicate materials, also named precursors. Commonly used precursors are fly ash (FA), blast furnace slag (GBFS), and metakaolin. The present study evaluated properties such as compressive strength, rate of water absorption (sorptivity), and chloride permeability in two types of alkaliactivated concretes (AAC): FA/GBFS 80/20 and GBFS/OPC 80/20. OPC and GBFS/OPC* concretes without alkaliactivation were used as reference materials. The highest compressive strength was observed in the FA/GBFS concrete, which reported 26,1% greater strength compared to OPC concrete after 28 days of curing. The compressive strength of alkaliactivated FA/GBFS 80/20 and GBFS/OPC 80/20 was 61 MPa and 42 MPa at 360 days of curing, respectively. These AAC showed low permeability to the chloride ion and a reduced water absorption. It is concluded that these materials have suitable properties for various applications in the construction sector.