Tin perovskite is rising as a promising candidate to address the toxicity and theoretical efficiency limitation of lead perovskite. However, the voltage and efficiency of tin perovskite solar cells are much lower than lead counterparts. Herein, indene-C60 bisadduct with higher energy level is utilized as an electron transporting material for tin perovskite solar cells. It suppresses carrier concentration increase caused by remote doping, which significantly reduces interface carriers recombination. Moreover, indene-C60 bisadduct increases the maximum attainable photovoltage of the device. As a result, the use of indene-C60 bisadduct brings unprecedentedly high voltage of 0.94 V, which is over 50% higher than that of 0.6 V for device based on [6,6]-phenyl-C61-butyric acid methyl ester. The device shows a record power conversion efficiency of 12.4% reproduced in an accredited independent photovoltaic testing lab.
Aqueous polysulfide/iodide redox flow batteries are attractive for scalable energy storage due to their high energy density and low cost. However, their energy efficiency and power density are usually limited by poor electrochemical kinetics of the redox reactions of polysulfide/iodide ions on graphite electrodes, which has become the main obstacle for their practical applications. Here, CoS2/CoS heterojunction nanoparticles with uneven charge distribution, which are synthesized in situ on graphite felt by a one-step solvothermal process, can significantly boost electrocatalytic activities of I−/I3− and S2−/Sx2− redox reactions by improving absorptivity of charged ions and promoting charge transfer. The polysulfide/iodide flow battery with the graphene felt-CoS2/CoS heterojunction can deliver a high energy efficiency of 84.5% at a current density of 10 mA cm−2, a power density of 86.2 mW cm−2 and a stable energy efficiency retention of 96% after approximately 1000 h of continuous operation.
For the state-of-the-art quantum dot light-emitting diodes, while the ZnO nanoparticle layers can provide effective electron injections into quantum dots layers, the hole transporting materials usually cannot guarantee sufficient hole injection owing to the deep valence band of quantum dots. Developing proper hole transporting materials to match energy levels with quantum dots remains a great challenge to further improve the device efficiency and operation lifetime. Here we demonstrate high-performance quantum dot light-emitting diodes with much extended operation lifetime using quantum dots with tailored energy band structures that are favorable for hole injections. These devices show a T95 operation lifetime of more than 2300 h with an initial brightness of 1000 cd m−2, and an equivalent T50 lifetime at 100 cd m−2 of more than 2,200,000 h, which meets the industrial requirement for display applications.