17 April 2024 in IEEE Transactions on Industrial Informatics
The intelligent manufacturing system is a complex, large-scale, interconnected system composed of many intelligent agents, and there may be physical or information space couplings between the agents. A distributed monitoring system and optimization control method are proposed to ensure the system completes its tasks safely and efficiently. The distributed monitoring system based on the average consensus algorithm is equivalent to the centralized design method, in which the submonitoring system only requires local and neighbor subsystem information. The advantage of this design is that it uses local and interactive information to achieve global diagnosis. In addition, sending data from all subsystems to a central computing node is challenging to implement in large-scale manufacturing systems. Based on the centralized plug-and-play (PnP) optimization control method, an average consensus algorithm distributed manufacturing system PnP optimization control method is proposed. Its advantage is that it uses local information and interactive information to achieve global control optimization. On this basis, an integrated architecture for distributed fault detection and optimization control is developed. The simulation results verify the feasibility and effectiveness of proposed method.
31 July 2023 in IEEE Industrial Electronics Magazine
With the rapid developments in computational and communication resources, modern industrial electronics systems can leverage networked structures to realize wireless remote control. However, owing to the intrinsically more open attributes of their cyberrealms, an adversary could eavesdrop on the sensitive information of control systems to elaborate insidious false data injection (FDI) attacks, leading to the destruction of safety performance at the control systems level while potentially also performing disguising capabilities against traditional anomaly detectors. In this article, we first introduce three kinds of FDI attack monitoring architectures while discussing their applicability to stealthy corruptions and capturing their advantages and deficiencies. Then, we discuss the significant meanings of FDI attack monitoring for deploying secure defense control, where the interconnections as well as the distinctions between safety and security, the methodologies of isolation and compensation for FDI attack-resilient control, and their great potential of integration with information security and machine learning techniques are discussed. Finally, a case study of an autonomous robot in an industrial electronics system is performed to provide viewpoints for researchers and practitioners. The purpose of this review is to retrospect the representative results on FDI attack monitoring and control and provide meticulous insights to advance the developments in safety and reliability of cyberphysical systems (CPSs).
25 October 2022 in IEEE Transactions on Industrial Electronics
Sensors are ubiquitous in automatized industrial systems. To ensure the safety of the process control, the fault diagnosis and fault-tolerant control of sensors is necessary. This article proposes subspace-aided sensor fault diagnosis and compensation control approaches based on the data-driven stable kernel representation (SKR) and stable image representation (SIR) identified by the process data decompositions. First, this article obtains data-driven SKR and SIR through the mapping relationship of the subspaces of signals and proposes a series of fault diagnosis and compensation approaches. Furthermore, considering the accuracy and timeliness, this article presents an accurate online fault diagnosis and compensation approach by the online updating $LQ$ decomposition. These approaches can perform fault diagnosis, fault estimation, and fault compensation for the multiple and different types of additive sensor faults. The effectiveness of the strategies has been verified by the numerical study and the three-tank experimental system, which has a specific engineering significance.
7 November 2024 in IEEE Transactions on Industrial Informatics
This article proposes a projection-aided robust distributed monitoring and control optimization approach for interconnected systems with disturbances. The disturbances and state coupling between subsystems are a challenge in achieving accurate distributed process monitoring using data-driven techniques. To address the problems, a distributed adaptive residual generator uses the average consensus algorithm to perform data fusion on the subsystem residual generator to implement disturbance decoupling process monitoring. The key to implementing this process is to use input and output data disturbance in the perturbed orthogonal complementary space to drive the adaptive residual generator. Then, using the projection technique, the residual signal in the disturbance space drives the distributed learning of plug-and-play (PnP) controller parameters. The average consensus algorithm ensures that the subsystem PnP controller parameter gradient consistency converges to the centralized design. The feasibility and effectiveness of the proposed approach are verified and demonstrated through a simulation.
9 September 2021 in IEEE Transactions on Control Systems Technology
This brief proposes a subspace-aided fault detection approach for the drive systems of strip rolling mills. Considering the impact of the unknown periodic load generated by the strip rolling process, the primary contributions are concluded as follows. First, this brief presents an approach to describe the subspace of the unknown/unmeasurable periodic load. Second, a fundamental frequency identification approach for the drive systems is proposed and then the subspace of the unknown periodic load can be constructed by the fundamental frequency. Third, this brief presents a subspace-aided fault detection approach to identify the data-driven stable kernel representation (SKR) of the closed-loop system by projecting the input–output (I/O) process data, so as to obtain a robust residual against the unknown periodic load. In addition, the effectiveness and performance of the approaches are verified by numerical examples and experimental data of the test rig for the drive systems of strip rolling mills. The results show that a robust residual generation against the unknown periodic load in the drive systems can be obtained and the robust subspace-aided fault detection can be achieved. Compared with the traditional method, the proposed approaches can improve the fault detection rate more effectively and be applied to the drive systems of strip rolling mills reliably.
30 August 2022 in IEEE Transactions on Industrial Electronics
As a result of informatization and wider use of connected intelligence, modern industry has evolved into being large scale. To overcome the inevitable shortcomings of centralized design in such cases, this article proposes a subspace-aided distributed closed-loop monitoring approach for interconnected systems. It only uses measurement information from local closed-loop subsystems. The residuals of each closed-loop subsystem can be obtained through the oblique projection technology and the information interaction to complete the evaluation and achieve distributed closed-loop monitoring. The contributions of this article can briefly be described as follows. First, the proposed approach performs distributed closed-loop monitoring, which is equivalent to centralized monitoring. Second, it can effectively reduce the computational complexity of the centralized design and improve efficiency. Third, the information interaction is achieved by transmitting nonessential information, which can effectively ensure secure information transmission in the case of information leakage. The proposed approach has been compared with the existing approach and validated by numerical simulation and an experimental three-tank system, which has a certain engineering significance.