29 October 2019 in ACS Applied Materials & Interfaces
1 May 2020 in Nanotechnology
Van der Waals heterostructures (vdWHs) based on two-dimensional (2D) materials are being studied extensively for their prospective applications in photodetectors. As the pristine WSe 2 /MoTe 2 heterostructure is a type I (straddling gap) structure, it cannot be used as a photovoltaic device theoretically, although both WSe 2 and MoTe 2 have excellent photoelectric properties. The Fermi level of p-doped WSe 2 is close to its valence band. The p-doped WSe 2 /MoTe 2 heterostructure can perform as a photovoltaic device because a built-in electric field appears at the interface between MoTe 2 and p-doped WSe 2 . Here, a 633 nm laser was used for scanning the surface of WSe 2 in order to obtain the p-doped WSe 2 . x-ray photoelectron spectroscopy (XPS) and electrical measurements verified that p-type doping in WSe 2 is produced through laser treatment. The p-type doping in WSe 2 includes substoichiometric WO x and nonstoichiometric WSe x . A photovoltaic device using p-doped WSe 2 and MoTe 2 was successfully fabricated. The band structure, light-matter reactions, and carrier-transport in the p-doped WSe 2 /MoTe 2 heterojunction were analyzed. The results showed that this photodetector has an on/off ratio of ≈10 4 , dark current of ≈1 pA, and response time of 72 μ s under the illumination of 633 nm laser at zero bias ( V ds = 0 V). The proposed p-doping method may provide a new approach to improve the performance of nanoscale optoelectronic devices.
6 November 2023 in Nano Letters
16 July 2021 in IEEE Transactions on Electron Devices
The outstanding physical and electrical properties of transition metal dichalcogenides (TMDs) as semiconductor materials demonstrate a promising platform for future electronic devices. Among all the TMDs, MoTe 2 , in which the bandgap is close to that of the silicon (Si), is a more favorable candidate than others to be applied in next-generation integrated circuits (ICs). However, the conventional physical or chemical doping method is complicated for fabricating the MoTe 2 logic ICs. The transistors with additional polarity gates (PGs) are defined as polarity-controllable transistors (PCTs). The PG can dynamically control the type of charge carriers (n- or p-type) in the source/drain by electrostatic doping without the need of any physical or chemical doping, and thus reconfigure the transistor between n-type and p-type. In our work, the ambipolar conduction property in MoTe 2 enables the fabrication of high-quality polarity-controllable MoTe 2 transistors (PCMTs) that are promising as building blocks to construct the MoTe 2 logic ICs. The on/off ratios of the PCMTs are above 10 7 for both n-type and p-type. The highest field-effect mobility μ of p- and n-type MoTe 2 transistors are 38 and 42, respectively. The inverter (INV) based on the PCMTs has achieved a high gain of 37. Furthermore, the logic-gate cell library, which includes INV, negative- AND (NAND), negative- OR (NOR), exclusive- OR (XOR), and maJority (MAJ) is demonstrated using PCMTs. The above-mentioned desirable properties make PCMTs promising for future applications in 2-D-semiconductor-material-based logic ICs.