Consiglio per la ricerca in agricoltura e l'analisi dell'economia agraria (CRA), Unità di ricerca per le produzioni legnose fuori foresta, Via valle della quistione, 27, 00166 Rome, Italy
Auto-generated profile, based on publicly available information
Stefano Verani
Consiglio per la ricerca in agricoltura e l'analisi dell'economia agraria (CRA), Unità di ricerca per le produzioni legnose fuori foresta, Via valle della quistione, 27, 00166 Rome, Italy
Short Rotation Forestry (SRF) plantations are estimated around 7 000 hectares in Italy, mostly established in northern regions. Recently thousands hectares of SRF were established in central and southern regions of Italy also (especially in Latium and Molise) due to the promising introduction of new clones resistant to summer water limiting and pest attacks. A poplar SRF plantation was established in central Italy in order to investigate the influence of site conditions and planting densities/spacings on the growth and yield production of three hybrid poplar clones (AF2, AF6 and Monviso). Cuttings of each clone were planted at two different densities/spacings and planting design as: (a) low density = 7 140 cuttings ha-1 in a single-row design (SR); (b) high density= 10 360 cuttings ha-1 in a twin-rows design (TR). Growth (both diameter and height) and yield were evaluated after biennial (2006-2007) and triennial (2008-2010) rotation. Relationships between fresh weight and diameter were determined to calculate the yield of each clone expressed in MgDM ha-1 years-1. At the end of the triennial rotation (2010) all poplar clones showed very high stump survival rates with higher values in SR (89.9%) compared to TR (85.6%). AF2 clone can be advisable thanks to the higher yield production than both AF6 and Monviso. Considering planting densities/spacings, SR seems to be more advisable than TR in order to obtain a good biomass production and a low planting costs. Considering the coppicing cycles, triennial rotation allows higher annual yield production (average value of 13.0 MgDM ha-1) than biennial rotation (average: 10.1 MgDM ha-1).
The sustainability of a small-scale self-consumption wood-energy chain for heat generation in central Italy was analyzed from a technical, economic and energetic point of view. A micro-chain was developed within the CRA-ING farm at Monterotondo (Rome, Italy): The purpose of this system was to produce biomass for supplying a heating plant within the CRA-ING property as a substitute for diesel fuel. A poplar short rotation coppice, established with clones AF2, AF6 and Monviso, fed the micro-chain. The rotation was biennial. The average plantation production (Mgd.m.·ha−1·year−1) was 10.2, with a maximum of 13.53 for the twin-rows AF2 and a minimum of 8.00 for the single-row Monviso. The economic assessment was based on the Net Present Value (NPV) method and the equivalent annuity cost, and found an average saving of 15.60 €·GJ−1 of heat generated by the wood chips heating system in comparison with the diesel heating system over a 10 year lifetime of the thermal power plant. The energy assessment of the poplar plantation, carried out using the Gross Energy Requirements method, reported an energy output/input ratio of 12.3. The energy output/input ratio of the whole micro-chain was 4.5.