8 May 2019 in Nuclear Fusion
31 May 2023 in Nuclear Fusion
Plasma with an internal transport barrier (ITB) will be developed in JT-60SA as an attractive operation appropriate for a steady-state fusion reactor. To achieve the ITB plasma while avoiding magnetohydrodynamic instabilities, it is advantageous to simultaneously control the safety factor (q) profile and the normalized beta ( ). In this study, a control system for simultaneous control of the q profile and is studied in simulations prior to the real experiment in JT-60SA. The bootstrap current dominates the total current in the ITB region, which results in a coupling between the pressure profile and the q profile. Thus, it is crucial to control the q profile and according to the strength of the ITB. A two-stage neural network (NN)-based control system was developed to address this problem. The first stage estimates the transport properties (i.e. ITB strength) of the plasma from measurements. The second stage consists of several NNs for control of the q profile and . According to the ITB strength estimated by the NN in the first stage, the appropriate NN for control is selected from those in the second stage. Each NN in the second stage is trained to control plasmas with different ITB strengths through reinforcement learning employing RAPTOR, an integrated transport code. To validate this system, it is tested in a simulation employing another integrated transport code, TOPICS, to mimic the plasma control in JT-60SA plasmas with various ITB strengths. Stable control of the q profile and is achieved in ITB plasmas simulated by both the RAPTOR and TOPICS codes.
6 September 2024 in Nuclear Fusion
The world’s largest superconducting tokamak, JT-60SA, has successfully achieved its first plasma operation under the constraint of a low toroidal inductive electric field of 0.15 V m−1. A plasma start-up scenario, leveraging the effective confinement of electrons accelerated by the electron cyclotron wave, proved to be instrumental in reaching this milestone under the challenging conditions. The demonstration of plasma start-up using second harmonic electron cyclotron heating, with an applied toroidal electric field of 0.15 V m−1, strongly validates the feasibility of achieving first plasma operation in ITER.
1 July 2024 in Review of Scientific Instruments
A real-time processing system for the two-color CO2 laser interferometer on the JT-60SA has been developed for density feedback control. The system has a novel feature that can detect fringe jumps due to off-normal events, such as loss detection due to displacement of the beam axis and changes in the laser wavelengths. Because a phase change due to the JT-60SA plasma is smaller than π/2, corresponding to the line-integral electron density NL of ∼6×1019 m−2 in a short interval of 500 ns, the threshold of the fringe jump detection is decided to be π/2. Hence, off-normal events can be detected from a fringe jump, leading to the abort of the real-time feedback control. In the density feedback control of the JT-60SA plasma, the system is employed as a density monitor, with NL being successfully controlled at 16.8% ± 6.6% lower than the reference.
21 May 2025 in Plasma Physics and Controlled Fusion
Stable MA-class divertor plasmas have been achieved in the JT-60SA first plasma campaign based on developed control schemes and careful assessment before the plasma operation. Fundamental plasma characteristics and parameter regimes in the first plasma campaign have been examined. The plasma breakdown was obtained at the low toroidal electric field of 0.12–0.15 with a trapped particle configuration and an Electron Cyclotron Heating (ECH) assist. The EC-assisted low breakdown was also obtained in a field null configuration by reducing the residual poloidal magnetic field (∼1 mT) and optimizing the initial coil voltage application during the plasma start-up. For the plasma current ramp, the Plasma Current Centroid scheme and the Adaptive Voltage Allocation scheme have been developed and applied. The former one is beneficial when a large eddy current is generated in the vacuum vessel. The latter one adjusts control gains automatically to avoid voltage saturation and unstable plasma control. The divertor configuration with the plasma current of 1 MA was achieved by using the Cauchy-condition surface scheme and sustained stably (for 3 s in the flat-top) until the flux supplied by the Central Solenoid coils was fully consumed. The plasma has been developed by finding paths to access stable operational regimes to avoid disruptions and critical MHD modes. Power balance analyses showed that the energy confinement time followed the L-mode scaling. A systematic EC wall cleaning has been performed to find suitable conditions for gas removal from the first wall. This paper presents the main scientific results of the plasma operation and the plasma control studies in JT-60SA clarifying the issues of starting plasma operation in a new large superconducting machine. The results can make contributions for ITER and DEMO especially in the first operation campaign and commissioning procedures of plasma operation and control systems.
11 October 2019 in Plasma Physics and Controlled Fusion
We report the experimental finding of n = 1 helical cores (HCs) accompanied by saturated m / n = 2/1 tearing modes (TMs) with low mode frequencies in JT-60U. The HCs accompanied by TMs were observed after an increase in the mode amplitude and a decrease in the mode frequency of m / n = 2/1 precursors with tearing parity. The decreased mode frequency is typically lower than 20 Hz. With various diagnostics, the coupling of n = 1 HCs and m / n = 2/1 TMs has been clearly observed. Because the coherent oscillations in the ion temperature are observed in both the core region and the edge region, the flux surfaces including the m / n = 2/1 magnetic island appear to have m = 1 helical deformation. It has also been suggested that the m / n = 2/1 TM and the HC rotate in the electron diamagnetic direction keeping f
m
/
n
=1/1(HC)
= 2 f
m
/
n
=2/1(TM)
in several plasmas. Here, f
m
/
n
=1/1(HC)
is the mode frequency of HCs and f
m
/
n
=2/1(TM)
is the mode frequency of TMs. In addition, the core seems to be shifted to the high-field side when the O-points of the m / n = 2/1 magnetic island line up in the midplane, which is confirmed by reconstructions of magnetohydrodynamic equilibria with motional Stark effect measurement and the MEUDAS code. Our observation of m / n = 2/1 TMs having HCs contributes to the understanding of the excitation mechanism of HCs in tokamak plasmas.