1 July 2024 in Physics of Plasmas
We present a laboratory study of photoelectric charging of dust particles and their lofting on a conducting surface in the presence of external electric fields. Insulating particles with diameter <45 μm are dispersed on a conducting surface exposed to ultraviolet (UV) light. In addition to the UV exposure, a positive or negative external electric field is applied. Independent of the orientation of the external electric field, the dust particles are found to be positively charged but with different mechanisms. It is shown that the orientation of the external electric field controls the dynamics of photoelectrons emitted from the dust particles and the conducting substrate surface. Distinctly different lofting results are shown between these two electric field cases. The results provide insight for understanding dust charging and release and helping develop mitigation solutions in particle accelerators, semiconductor manufacturing, fusion reactors, and space exploration to planetary bodies.
1 November 2025 in Physics of Plasmas
We present the laboratory results of charging and mobilization of dust particles resting on an insulating or a conducting surface that is exposed to either a pulsed or a constant electron beam. Dust particles are mobilized on both types of surfaces, but with different mobility levels. The mobilization is explained using the patched charge model for single particles, which shows that the emission and reabsorption of secondary electrons within a microcavity formed between a particle and the substrate surface result in enhanced charging and subsequent mobilization due to Coulomb repulsion. For the insulating surface, the pulsed beam results in significantly higher mobility than the constant beam, and it exhibits a mobility spike shortly after the beam is turned on. These results are likely attributed to an enhanced secondary electron yield and charge fluctuation due to the rapid temporal variation of the beam. Dust mobilization occurs over an extended period, likely due to the irregular shape of the particles, which can result in variations in both microcavity charging and the surface adhesive force. Mobility on the conducting surface is significantly lower than on the insulating surface due to the attractive image charge force that tends to hold particles on the surface. These results enhance our understanding of dust mobilization in pulsed or time-varying charging conditions, such as those found in particle accelerators, extreme ultraviolet lithography machines, and on airless planetary surfaces.
5 July 2022 in Physical Review Accelerators and Beams
This article presents a reliability analysis method and a series of case studies of different architectures for interlock systems of large and complex research infrastructures. Interlock systems play a crucial role in the protection of different types of machines, including present and future particle accelerators and fusion experiments. These infrastructures require multibillion Euros investments and accidents could cause irreparable damage. Protection systems are needed to prevent damage from an unintended release of large amounts of stored energy or power. Interlock systems define the signal exchange between the sensors that detect non-nominal conditions and the actuators that bring the machine into a safe state through a protection shutdown. The design of machine protection systems in general and interlock systems, in particular, is caught between the desired machine safety and machine availability, and the requirements vary between different infrastructures. For some infrastructures, interlock systems must be designed to strictly avoid unintentional shutdowns, as these can have a significant impact on the lifetime of vital equipment or their primary operational purpose. For others, unintentional shutdowns due to a failure in the interlock system are acceptable as long as their number is small compared to protection shutdowns caused by failures of other equipment, in order to maximize their scientific output. The case studies presented in the article compare different interlock architectures based on the probability of specific failure scenarios occurring.