Plastic shrinkage cracking propagating at early ages inevitably impairs the performance of concrete structures. To mitigate this, using a recently developed shrinkage-reducing polycarboxylate superplasticiser (SR-PCA) with outstanding shrinkage-reducing and water-reducing effectiveness can be a promising approach. The present work aims to investigate the effect of SR-PCA on plastic shrinkage cracking and to clarify the underlying mechanisms. For comparison, a traditional polyether type shrinkage reducing admixture (SRA) and a polycarboxylate superplasticiser (PCA) were also used. Based on the investigations on horizontal shrinkage, settlement, bleeding, evaporation mass loss, cement hydration, surface tension of pore fluid and capillary pressure, the underlying working mechanisms of SR-PCA were identified. The results indicate that SR-PCA is able to reduce the crack area, maximum crack width and average crack width by up to 55, 48 and 50%, respectively. Furthermore, prolonging the bleeding duration and initial time of capillary pressure build-up caused by retarding the cement hydration, lowering the evaporation mass loss, and a lower development rate of capillary stresses and capillary pressure peak value induced by decreasing the surface tension of pore fluid are responsible for preventing the plastic shrinkage cracking of mortars containing SR-PCA.
6 February 2023 in Journal of Sustainable Cement-Based Materials
Applying plastic expansive agent to solve the debonding and non-compacting problem in sealed structures (e.g. concrete-filled steel tube) caused by the deformation of concrete has become an important method. In this study, the effect of azodicarbonamide expansive agent (ADC) on the deformation, mechanical properties, hydration process, and pore structure of cement pastes and concrete was investigated. The results show that the low static yield stress and viscosity promote the formation and growth of bubbles, which are disadvantageous for their stabilization. The ADC reaction rate increases with the elevated temperature, which benefits for shortening the time to mitigate shrinkage. ADC has a limited effect on cement hydration but remarkably alters the pore structure. The balance between deformation and strength is considered to be the important criteria for determining the optimal dosage of ADC.
18 January 2024 in Journal of Building Engineering