28 October 2022 in Materials and Structures
12 November 2022 in Journal of the American Ceramic Society
1 June 2022 in Magazine of Concrete Research
Plastic shrinkage cracking propagating at early ages inevitably impairs the performance of concrete structures. To mitigate this, using a recently developed shrinkage-reducing polycarboxylate superplasticiser (SR-PCA) with outstanding shrinkage-reducing and water-reducing effectiveness can be a promising approach. The present work aims to investigate the effect of SR-PCA on plastic shrinkage cracking and to clarify the underlying mechanisms. For comparison, a traditional polyether type shrinkage reducing admixture (SRA) and a polycarboxylate superplasticiser (PCA) were also used. Based on the investigations on horizontal shrinkage, settlement, bleeding, evaporation mass loss, cement hydration, surface tension of pore fluid and capillary pressure, the underlying working mechanisms of SR-PCA were identified. The results indicate that SR-PCA is able to reduce the crack area, maximum crack width and average crack width by up to 55, 48 and 50%, respectively. Furthermore, prolonging the bleeding duration and initial time of capillary pressure build-up caused by retarding the cement hydration, lowering the evaporation mass loss, and a lower development rate of capillary stresses and capillary pressure peak value induced by decreasing the surface tension of pore fluid are responsible for preventing the plastic shrinkage cracking of mortars containing SR-PCA.
29 July 2023 in Materiali in tehnologije
In engineering, waste mud is often used as a filling material after a solidification treatment. Geogrids, being excellent geotechnical engineering materials, are often used for soil reinforcement. In this work, a pullout test that considered the influence of different waste-mud moisture contents and cement contents was conducted to investigate the interface characteristics of geogrid-solidified waste-mud-reinforced soil. Then, the relationship between the pullout force and displacement, and the variations in the cohesion, friction angle and quasifriction coefficient were analysed. The results showed that the pullout force-displacement curve represented a strain-softening pattern. With the increasing moisture content, the peak pullout force, interfacial cohesion and quasifriction coefficient decreased gradually, but the internal friction angle did not change substantially. With the increasing cement content, the peak pullout force, interfacial cohesion, internal friction angle and quasifriction coefficient increased gradually. The peak pullout force was linearly correlated with the change in the moisture content and logarithmically correlated with the change in the cement content. Compared with the moisture content, the reinforcement-soil interface was more affected by the cement content. This study provides guidelines for the mixture design of reinforced solidified waste mud.