A superior mix of big and small: Graphene is often described as an unrolled carbon nanotube. However, although nanotubes are known for their exceptional mechanical and conductivity properties, the same is not true of graphene-based fibers. Xin et al. intercalated small fragments of graphene into the gaps formed by larger graphene sheets that had been coiled into fibers. Once annealed, the large sheets provided pathways for conduction, while the smaller fragments helped reinforce the fibers. The result? Superior thermal and electrical conductivity and mechanical strength. Science , this issue p. 1083
11 August 2014 in ACS Applied Materials & Interfaces
Zinc oxide, as an inexpensive anode material, has attracted less attention than other metal oxides due to its poor cycling stability. A rational design of ZnO nanostructures with well-controlled particle sizes and microstructures is essential in order to improve their stability and performance as electrodes for lithium ion batteries (LIBs). Here, we demonstrate a simple approach via atomic layer deposition (ALD) to synthesize ZnO quantum dots (QDs) on graphene layers, in which the size of the ZnO QDs can be controlled from 2 to 7 nm by ALD cycles. A strong relationship between size and electrochemical performance is observed, in which smaller sized QDs on graphene display enhanced electrochemical performance. A high reversible specific capacity of 960 mA h g−1 is achieved at a current density of 100 mA g−1 for 2 nm ZnO QDs, approaching to the theoretical value of ZnO as the LIB anode. The greatly enhanced cycling stability and rate performance of the ALD ZnO QD/graphene composite electrode can be attributed to the well-maintained structural integrity without pulverization upon electrochemical charge/discharge for ZnO QDs with the grain size below a critical value.
Organic-inorganic perovskite materials are revolutionizing photovoltaics with high power conversion efficiencies, but experience significant environmental degradation and instability. In this work, the phase stability and decomposition mechanisms of lead-free all inorganic Cs2SnI6 perovskite upon water and moisture exposure were systematically investigated via in situ synchrotron X-ray diffraction, environmental SEM, and micro-Raman spectroscopy. A critical relative humidity (80%) is identified below which Cs2SnI6 perovskite is stable without decomposition. Under higher humidity or aqueous environment, Cs2SnI6 perovskite decomposes into SnI4 and CsI through etch pits formation and stepwave propagation, leading to rapid crystal dissolution. A partial reversibility of the Cs2SnI6 perovskite upon dissolution and re-precipitation with subsequent dehydration was identified, suggesting a self-healing capability of Cs2SnI6 and thus enhanced air stability. Mechanistic understanding of the Cs2SnI6 degradation behavior can be a vital step towards developing new perovskites with enhanced environmental stability and materials performance.