1 March 2013 in Construction and Building Materials
1 January 2012 in Resources, Conservation and Recycling
1 June 2017 in Journal of Cleaner Production
1 September 2012 in Construction and Building Materials
30 June 2011 in Materiales de Construcción
Seven different types of recycled aggregates from construction and demolition waste (CDW) have been evaluated as granular materials for unbound road sub-bases construction. The results showed that recycled concrete aggregates complied with all specifications for using in the construction of unbound structural layers (sub-base) for T3 and T4 traffic categories according to the Spanish General Technical Specification for Road Construction (PG-3). Some mixed recycled aggregates fell short of some specifications due to a high content of sulphur compounds and poor fragmentation resistance. Sieving off the fine fraction prior to crushing the mixed CDW reduce the total sulphur content and improve the quality of the mixed recycled aggregates, by contrast, pre-sieving concrete CDW had no effect on the quality of the resulting aggregates. The results were compared with a crushed limestone as natural aggregate.
25 July 2016 in Road Materials and Pavement Design
Because the recycling of construction and demolition waste (CDW) has been deemed to be a priority, the use of a recycled aggregate has been widely demonstrated as a sustainable contribution among different materials applied in civil projects. Roller compacted concrete (RCC) applications offer technical, economic and ecological solutions in many civil construction projects. To the best of the authors’ knowledge, there has been little research on the use of RCC with a coarse recycled aggregate that does not originate from pavement. This research evaluates the use of recycled concrete aggregates (RCA) from a CDW recycling plant in RCC mixtures. Four series of RCC mixtures were produced with different cement contents (110, 175, 250 and 350 kg/m3). Each series consisted of three mixtures with different RCA incorporation ratios (0%, 50% and 100%) of natural coarse aggregates, thus producing 12 RCC mixtures to evaluate the effect on the compaction, the mechanical and physical properties while highlighting a new laboratory casting method for flexural strength and drying shrinkage tests. Based on the obtained results, the use of coarse RCA in RCC production is feasible at a replacement level of 100% when using these materials in road pavement bases.