3 March 2025 in IEEE Transactions on Instrumentation and Measurement
In this paper, an analog lock-in amplifier (ALIA) based on synchronous in-phase and quadrature (I/Q) demodulation is proposed for wide range capacitance measurement of high accuracy. In order to improve the signal-to-noise ratio (SNR), an extra compensation channel was employed to quickly pre-determine the capacitance to be measured and optimize the measurement configurations. A transimpedance amplifiers is designed to eliminate the adverse impacts of parasitic parameters for optimal SNR, which is accomplished by applying an adaptive strategy to control the excitation frequency and compensation capacitance. Additionally, a capacitance measurement model with improved accuracy is established by considering the effect of non-ideal characteristics of devices. A prototype is fabricated and tested to verify the effectiveness of the proposed ALIA. It is shown that the ALIA has excellent comprehensive performances, which can achieve capacitance measurement with an average error of 0.52% in a wide range of 10 fF-10 nF. The measurement error is reduced by 9.74% in the full-scale range by considering the non-ideal characteristics of devices, which is reduced by 25.24% in measuring small-valued capacitances (<1 pF), compared to a commercial lock-in amplifier. The ALIA has a strong robustness against additive noise with a SNR of -42 dB. Additionally, a comprehensive uncertainty budget is presented and the uncertainty components of the system are identified and summarized. A low capacitance measurement uncertainty budget ranges from -57.1 dB to -50.8 dB in the full-scale range.
3 June 2025 in IEEE Sensors Journal
This article presents a novel method for measuring the mass flow rate of gas-liquid two-phase flow based on the multi-sensor data fusion and soft computing model. A multi-sensor system comprising a throat-extended Venturi tube and a dual-modality electrical sensor has been developed for gas-liquid two-phase flow measurement. Soft computing models are employed to address the intricate non-linear mapping between the measurement data and flow parameters. Initially, flow regimes are identified based on the time-domain features of the multi-sensor data using a support vector machine. Subsequently, mass quality is derived from the multi-differential pressure fluctuations and the eigenvalue sequence of the normalized electrical matrices, employing a hybrid neural network comprising a convolution neural network and a deep neural network. Ultimately, gas/liquid over-reading is predicted via Extreme Gradient Boosting using multi-differential pressure ratios. The gas and liquid mass flow rates are subsequently derived from the preceding results. The proposed method addresses the issue that the parameters measurement of gas-liquid two-phase flow is significantly influenced by the flow regimes, and achieves accurate flow rate measurement under the diverse flow regimes. Experimental validation confirms the method’s effectiveness and superior performance compared to conventional approaches.
21 February 2025 in IEEE Transactions on Instrumentation and Measurement
Online measurement of water entry cavity is important for the stable manipulation of high-speed underwater vehicles. However, there are almost no feasible methods to track and measure the cavity online when the vehicles are moving. For this purpose, an online measurement method using outwards electrical capacitance tomography (Outwards-ECT) is proposed to obtain the circumferential cavity profile on the outer surface of an axisymmetric blunt body during water entry. An Outwards-ECT physical model is developed to incorporate the effect of finite boundary on the cavity measurement in laboratory tests. Based on this physical model, simulation is conducted and a cavitator equipped with Outwards-ECT electrodes is designed and fabricated, enabling the reconstruction of the cavity profile during water entry. Experiments were carried out to verify the proposed method, where images taken by a high-speed camera are used as references. It is found that the cavity profiles reconstructed by the Outwards-ECT are consistent with their references when the cavitator enters water in different attitudes, where the relative measurement errors of the cavity diameter are less than 5.9%. Analyzing the boundary measurements by the Outwards-ECT sensor shows that the global capacitance is related to the water entry stages and attitudes of the cavitator as well as the initial entry velocity. Overall, the success of this approach would provide a feasible method for the online measurement of water entry cavity when the high-speed underwater vehicles are moving, which is essential for their online control to maintain a stable cavity.